Refine Results

• Brand
  •  Little Giant (1)
  •  Nibco (8)
  •  Spears (12)
  •  Zoeller (1)
• Product Type
  •  Ball Check Valve (4)
  •  Ball Valve (7)
  •  Gate Valve (8)
  •  Long Sweep 90D Elbow (1)
  •  Submersible Pump (1)
  •  Submersible Sump Pump (1)
• Actuation Type
  •  1/4 TURN T-HANDLE (7)
  •  Multi-Turn Standard Handwheel (8)
• Additional Information
  •  1 PER STANDARD PACK; 4 PER MASTER CARTON; APPLICABLE STAND… (1)
  •  SHIPPING WEIGHT 87 LB (1)
  •  WEIGHT 28.5 LB; SHUT OFF HEAD 18 FT (1)
• Angle
  •  90 DEG (1)
• Applicable Standard
  •  CSA (1)
  •  MSS-SP-80 (8)
  •  NSF (11)
  •  UL (1)
• Application
  •  CHEMICAL, WATER (7)
  •  Commercial, Industrial (8)
  •  INDUSTRIAL, CHEMICAL (4)
  •  WATER (1)
• Body Material
  •  ASTM D1784 CPVC (1)
  •  CPVC (10)
  •  DZR Bronze (8)
• Bonnet Type
  •  Union (8)
• Casing Material
  •  RYTON./CAST IRON (1)
• Collection
  •  Eliminator[R] (1)
• Discharge Head
  •  5 TO 15 FT (1)
• Discharge Size
  •  1-1/2 INCH (1)
  •  2/3 INCH (1)
• End Connection
  •  1 INCH SOCKET WELD X 1 INCH SOCKET WELD (1)
  •  1-1/2 INCH FNPT DISCHARGE (1)
  •  1-1/2 INCH SOCKET WELD X 1-1/2 INCH SOCKET WELD (1)
  •  1-1/2 INCH THD X 1-1/2 INCH SOCKET (1)
  •  1-1/4 INCH SOCKET WELD X 1-1/4 INCH SOCKET WELD (1)
  •  1-1/4 INCH THD X 1-1/4 INCH SOCKET (1)
  •  1/2 INCH SOCKET WELD X 1/2 INCH SOCKET WELD (1)
  •  2 INCH SOCKET WELD X 2 INCH SOCKET WELD (1)
  •  2 INCH THD X 2 INCH SOCKET (1)
  •  3/4 INCH SOCKET WELD X 3/4 INCH SOCKET WELD (1)
  •  3/4 INCH THD X 3/4 INCH SOCKET (1)
  •  4 INCH SOCKET WELD X 4 INCH SOCKET WELD (1)
  •  4 INCH SOLVENT WELD SOCKET X 4 INCH SOLVENT WELD SOCKET (1)
  •  Female Threaded x Female Threaded (8)
• Float Type
  •  INTEGRAL MERCURY SWITCH (1)
• Flow Rate
  •  17.5 TO 47 GPM (1)
• Handle Material
  •  POLYPROPYLENE (7)
• Housing Material
  •  EPOXY COATED CAST IRON (1)
• Impeller Material
  •  VORTEX NYLON (1)
• Inclusions Features
  •  3 FT CONDUIT, AUTOMATIC (1)
  •  AUTOMATIC OPERATION, UPPER AND LOWER SINTERED SLEEVE BEARING (1)
  •  BUTTRESS THREADED DOUBLE UNION NUT (1)
• Input Supply Rating
  •  115 V (1)
  •  115 V 60 HZ 735 W 9.5 AMPERE (1)
• Material
  •  CPVC (1)
• Material Specification
  •  ASTM D1784 (1)
• Model No. (Corrected)
  •  2122 (6)
  •  2229 (4)
  •  2322 (1)
  •  806 (1)
  •  HT-6E-CIA-FS (1)
  •  M3161 (1)
  •  T-174-A (8)
• Motor Type
  •  SHADED POLE (1)
• Nominal Size
  •  1 INCH (1)
  •  1 Inch x 1 Inch (1)
  •  1-1/2 INCH (2)
  •  1-1/2 Inch x 1-1/2 Inch (1)
  •  1-1/4 INCH (2)
  •  1-1/4 Inch x 1-1/4 Inch (1)
  •  1/2 INCH (1)
  •  1/2 Inch x 1/2 Inch (1)
  •  1/4 Inch x 1/4 Inch (1)
  •  2 INCH (2)
  •  2 Inch x 2 Inch (1)
  •  3/4 INCH (2)
  •  3/4 Inch x 3/4 Inch (1)
  •  3/8 Inch x 3/8 Inch (1)
  •  4 INCH (1)
• Nominal Size Decimal
  •  0.5 (1)
  •  0.75 (2)
  •  1 (1)
  •  1.25 (2)
  •  1.5 (2)
  •  2 (2)
  •  4 (1)
• Nominal Size Decimal UOM
  •  in (11)
• Nominal Size Fractional
  •  1 (1)
  •  1/1/2002 (2)
  •  1/1/2004 (2)
  •  2 (2)
  •  2-Jan (1)
  •  4 (1)
  •  4-Mar (2)
• Overall Dimensions
  •  8-3/4 INCH L X 8-1/2 INCH W X 10-7/8 INCH H (1)
• Power Cord Length
  •  15 FT (1)
  •  20 FT (1)
• Power Rating
  •  1/2 HP (1)
  •  1/3 HP (1)
• Pressure Rating
  •  150 PSI WATER AT 73 DEG F (1)
  •  235 PSI NON SHOCK WATER AT 73 DEG F (4)
  •  235 PSI WATER AT 73 DEG F (6)
  •  7.8 PSI (1)
  •  Class 300, 600 PSI CWP, 300 PSI SWP (8)
• Process
  •  FABRICATED (1)
• Schedule
  •  80 S (1)
• Seal Material
  •  Bronze (8)
  •  EPDM O-RING (11)
• Seat Material
  •  Bronze (8)
  •  PTFE (7)
• Shaft Seal Details
  •  CARBON/NI-RESIST/VITON. SEAL (1)
  •  SINGLE SEAL (1)
• Size A
  •  4 INCH (1)
• Size A Decimal
  •  4 (1)
• Size A Decimal UOM
  •  in (1)
• Size A Fractional
  •  4 (1)
• Size B
  •  4 INCH (1)
• Size B Decimal
  •  4 (1)
• Size B Decimal UOM
  •  in (1)
• Size B Fractional
  •  4 (1)
• Solid Size
  •  1/2 INCH (1)
• Stem Design
  •  Rising (8)
• Temperature Rating
  •  -10 to 140 Deg F (15)
  •  -10 to 220 Deg F (6)
  •  -15 to 110 Deg F (19)
  •  -20 TO 180 DEG F (710)
  •  -20 to 100 Deg F (5)
  •  -20 to 170 Deg F (4)
  •  -20 to 170 Deg F, 210 Deg F (Intermittent) (5)
  •  -20 to 180 Deg F (37)
  •  -200 to 550 Deg F (4)
  •  -30 TO 230 DEG F (11)
  •  -40 TO 150 DEG F (31)
  •  -40 TO 230 DEG F (519)
  •  -40 to 110 Deg F (4)
  •  -40 to 125 Deg F (9)
  •  -40 to 140 Deg F (5)
  •  -40 to 175 Deg F (13)
  •  -40 to 180 Deg F (14)
  •  -40 to 230 Deg F (76)
  •  -40 to 250 Deg F (67)
  •  -400 to 500 Deg F (5)
  •  -450 to 500 Deg F (19)
  •  -50 to 400 Deg F (13)
  •  0 to 150 Deg F (8)
  •  0 to 160 Deg F (11)
  •  0 to 175 Deg F (11)
  •  0 to 200 Deg F (6)
  •  0 to 250 Deg F (36)
  •  0 to 350 Deg F (11)
  •  0 to 400 Deg F (27)
  •  100 Deg F (18)
  •  100 Deg F (Continuous Duty), 140 Deg F (Intermittent ) (5)
  •  104 Deg F (16)
  •  110 to 33 Deg F (7)
  •  113 Deg F (20)
  •  130 Deg F (42)
  •  14 to 284 Deg F (6)
  •  140 DEG F (5)
  •  140 Deg F (167)
  •  140 Deg F (Fluid) (6)
  •  140 Deg F (Liquid), 266 Deg F (Stator), 221 Deg F (Thermal… (15)
  •  140 Deg F (Operating), 33 to 140 Deg F (Ambient) (8)
  •  150 DEG F (6)
  •  150 Deg F (Fluid) (5)
  •  160 Deg F (83)
  •  180 Deg F (101)
  •  194 Deg F (15)
  •  194 Deg F at 43.8 PSI (9)
  •  200 DEG F (14)
  •  200 Deg F (33)
  •  210 Deg F (35)
  •  212 Deg F (27)
  •  212 Deg F, 70 to 120 Deg F (Operating) (10)
  •  225 Deg F (28)
  •  225 Deg F (Continuous), 250 Deg F (intermittent ) (33)
  •  225 Deg F (Standard Seal), 250 Deg F (Special Seal) (6)
  •  230 Deg F (18)
  •  240 Deg F (10)
  •  250 DEG F (5)
  •  250 Deg F (96)
  •  260 Deg F at 150 PSI (12)
  •  267 Deg F (5)
  •  300 Deg F (64)
  •  32 to 120 Deg F (11)
  •  32 to 210 Deg F (5)
  •  320 Deg F (26)
  •  33 to 110 Deg F (7)
  •  33 to 140 Deg F (16)
  •  33 to 160 Deg F (12)
  •  33 to 180 Deg F (57)
  •  33 to 250 Deg F (8)
  •  350 Deg F (18)
  •  353 Deg F (22)
  •  353 Degree F (9)
  •  366 Deg F (36)
  •  366 Degree F (30)
  •  37 to 102 Deg F (7)
  •  391 Deg F (6)
  •  40 to 100 Deg F (12)
  •  40 to 140 Deg F (40)
  •  40 to 150 Deg F (45)
  •  40 to 160 Deg F (9)
  •  40 to 180 Deg F (5)
  •  40 to 200 Deg F (Fluid) (10)
  •  40 to 225 Deg F (7)
  •  40 to 230 Deg F (14)
  •  40 to 230 Deg F (Fluid) (7)
  •  400 Deg F (109)
  •  406 Deg F (5)
  •  406 Degree F (12)
  •  421 Deg F (10)
  •  421 Degree F (8)
  •  450 Deg F (24)
  •  50 to 200 Deg F (Fluid) (8)
  •  50 to 200 Deg F (Fluid), 125 Deg F (Ambient) (5)
  •  70 to 145 Deg F (5)
  •  80 to 120 Deg F (19)
  •  90 to 160 Deg F (20)
  •  90 to 180 Deg F (5)
  •  95 to 125 Deg F (8)
  •  MAXIMUM 230 DEG F (15)
• Type
  •  FULL BORE (6)
  •  LONG SWEEP (1)
  •  Solid Wedge (8)
  •  TRUE UNION (5)
• Wedge Material
  •  Bronze (8)
+ Show All Refinements