Refine Results

• Brand
  •  B&G (4)
  •  Taco (3)
  •  Watts (1)
• Product Type
  •  Cartridge Circulating Pump (2)
  •  Circulator Pump (1)
  •  Flow Control Valve (4)
  •  Relief Valve (1)
• Additional Information
  •  Includes Removable Cap (4)
  •  Lead-Free (3)
  •  Pressure Steam Discharge Capacity 5250000 BTU/Hour (1)
• Applicable Standard
  •  UL (Canada and US), NSF/ANSI 372 (3)
• Application
  •  Boiler (1)
  •  Hydronic Heating, Radiant In-Floor/Panel Heating, Closed-L… (1)
  •  Indirect Water Heater, Forced Water System (1)
  •  Indirect Water Heater, Hot Water System (3)
  •  Residential/Light Commercial Closed-Loop Hydronic Heating,… (2)
• Body Material
  •  Bronze (1)
  •  Cast Iron (2)
  •  Cast Iron\Bronze (1)
  •  Iron (1)
• Casing Material
  •  Cast Iron (2)
  •  Stainless Steel (1)
• Collection
  •  Flo-Control[TM] (4)
• Discharge Head
  •  0 to 31 Foot (1)
  •  0 to 33 Foot (1)
  •  35 Foot (1)
• Discharge Size
  •  3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch (2)
• End Connection
  •  Female Threaded x Female Threaded (4)
  •  Flanged x Flanged (2)
  •  Soldered x Soldered (1)
• Exclusions
  •  Mechanical Seal (2)
• Flow Rate
  •  0 to 31 GPM (1)
  •  0 to 34 GPM (1)
  •  10 GPM (1)
  •  4 GPM (Copper) (1)
  •  45 GPM (Copper), 50 GPM (Iron) (1)
• Impeller Material
  •  Non Metallic (2)
  •  Non-Metallic (1)
• Inclusions Features
  •  Aluminum Stator Housing, Stainless Steel Cartridge, Carbon… (1)
  •  Aluminum Stator Housing, Stainless Steel Cartridge, Cerami… (1)
  •  Low Power Consumption, Aluminum Stator Housing, Carbon Bea… (1)
  •  Test Lever (1)
• Inlet Size
  •  2 Inch (1)
• Input Supply Rating
  •  115 Volt AC 60 Hertz 1-Phase 1.4 Amp (1)
  •  115 Volt AC 60 Hertz 1-Phase 1.76 Amp (2)
• Model No. (Corrected)
  •  1 (1)
  •  13 (1)
  •  740 (1)
  •  9 (1)
  •  SA (1)
• Motor Type
  •  Permanent Split Capacitor Impedance Protected (1)
  •  Permanent Split Capacitor, Impedance Protected (2)
• Nominal Size
  •  1-1/2 Inch x 1-1/2 Inch (1)
  •  1-1/4 Inch x 1-1/4 Inch (1)
  •  2 Inch x 2 Inch (1)
  •  3/4 Inch (1)
• Normal Condition
  •  Open (2)
• Outlet Size
  •  2-1/2 Inch (1)
• Overall Dimensions
  •  7 Inch Length x 4-1/8 Inch Width x 6-3/8 Inch Height (1)
  •  7-1/2 Inch Length x 5-5/8 Inch Width x 6-1/2 Inch Height (1)
  •  7-1/2 Inch Length x 6 Inch Width x 6-1/2 Inch Height (1)
• Overall Length
  •  3-1/4 Inch (1)
  •  4 Inch (1)
  •  5 Inch (1)
• Power Rating
  •  1/6 HP (1)
  •  1/8 HP (2)
• Pressure Rating
  •  125 PSI (2)
  •  125 PSIG (2)
  •  150 PSI (3)
  •  30 to 75 PSI (1)
• Seal Material
  •  Asbestos-Free (1)
• Set Pressure Range
  •  30 PSI (1)
• Shaft Material
  •  Ceramic (3)
• Speed Rating
  •  3250 RPM (3)
• Spring Material
  •  Stainless Steel (1)
• Suction Size
  •  3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch (2)
• Temperature Rating
  •  -40 to 165 Deg F (1)
  •  0 to 175 Deg F (3)
  •  130 to 240 Deg F (High Limit), 110 to 220 Deg F (Low Limit) (1)
  •  135 Deg F (1)
  •  212 Deg F (1)
  •  225 Deg F (3)
  •  240 Deg F (1)
  •  250 Deg F (5)
  •  300 Deg F (2)
  •  32 to 122 Deg F (2)
  •  32 to 300 Deg F (1)
  •  32 to 406 Deg F (1)
  •  34 TO 203 DEG F (1)
  •  40 to 220 Deg F (Fluid) (2)
  •  40 to 230 Deg F (6)
  •  40 to 230 Deg F (Fluid) (3)
  •  40 to 240 Deg F (1)
  •  40 to 240 Deg F (Fluid) (1)
• Type
  •  Compact, Direct Drive (2)
  •  Standard, High Capacity, Compact (1)
  •  Straight Angle, Manual (1)
  •  Straight, Manual (1)
  •  Straight/Angle, Manual Open (2)
• Warranty
  •  3 Year (1)
  •  3 Year from Date of Manufacture (2)
+ Show All Refinements