Refine Results
- Brand
- Product Type
- Dewatering Effluent Pump (1)
- Effluent Pump (1)
- Grinder Package (3)
- Grinder Package System (1)
- Grinder Pump (1)
- Magnetic Float (1)
- Portable Transfer Pump (1)
- Residential Grinder Pump (2)
- Sewage Ejector System (1)
- Sewage Pump (12)
- Sewage System (5)
- Simplex Sewage System (2)
- Submersible Sump Pump (3)
- Sump Pump (12)
- Sump Pump Box System (1)
- Sump Pump Kit (2)
- Sump Pump System (1)
- Utility Pump (1)
- Additional Information
- Back-Up Pump Rating 12 Volt DC 1000 Milliamp (1)
- Basin Size 36 Inch x 72 Inch; Finish Powder Coated; Basin … (1)
- Basin Size 36 Inch x 72 Inch; Finish Powder Coated; Basin … (1)
- Battery Dimension 13 Inch Length x 7-1/
2 Inch Width x 9-1/ … (1) - Cord Type SJTW (1)
- Cord Type SJTW; Insulation Class B (2)
- Covers and Filter Tray Type Structural Foam; Total Basin C… (1)
- Current Rating 12 FLA/
2.5 LRA; Stator Winding Class B; The… (1) - Finish Gray (1)
- Finish Powder Coated; Locked Rotor Current Rating 23.7 Amp… (1)
- Finish Powder Coated; Locked Rotor Current Rating 53 Amp; … (1)
- Insulation Type Class B; Tank Capacity 41 Gallon (1)
- Kit Contains 16-1/
2 Inch x 15 Inch Poly Sump Pit, Poly Cov… (1) - Locked Rotor Current Rating 28 Amp; Safety Factor 1; Stato… (1)
- Minimum Bearing Life 50000 Hour; Paint Powder Coat (1)
- Motor Protection Type Auto Reset Thermal Overload; Cooling… (1)
- Power Cord Type SJTW; Locked Rotor Current Rating 29.1 Amp… (1)
- Power Cord Type SJTW; Shut-Off Head Size 37 Foot (1)
- SPEED RATING 3450 RPM; POWER CORD LENGTH 15', CORD TYPE UL… (1)
- Service Factor 1.0; Thermal Overload Temperature 221 Deg F (1)
- Size 13 Inch (Off Level), 25 Inch (On Level), 31 Inch (Ala… (1)
- Speed Rating 3450 RPM; Motor Type Oil-Filled; Power Cord L… (1)
- Stator Winding Class B (1)
- Sump Diameter 10 Inch (1)
- Switch Type Automatic; Plug-End Type Series Plug (1)
- Switch Type Manual (4)
- Tank Capacity 41 Gallon; Insulation Class B (1)
- Tank Material Polyethylene; Cover Material Polypropylene (2)
- Thermal Overload Temperature Rating 105 Deg C (1)
- Applicable Standard
- ADA (423)
- ADA, ANSI/
ASME A112.19.2, CSA B45.3 (36) - ADA, ASME A112.18.1, ANSI/
ICC A117.1, CSA B125.1, CSA (CAN… (91) - ADA, ASME A112.18.1, CSA B125.1, ICC/
ANSI A117.1, NSF 61, … (273) - ADA, ASME A112.18.1, CSA B125.1, ICC/
ANSI A117.1, NSF 61, … (303) - ADA, ASME A112.18.1/
A112.18.2, CSA B125.1/ B125.2, ICC/ ANSI… (96) - ADA, ASME A112.18.1/
A112.18.6, CSA B125.1, ICC/ ANSI A117.1 (48) - ADA, ASME A112.18.1/
CSA B125.1 (215) - ADA, ASME A112.18.1/
CSA B125.1, ANSI/ ICC A117.1, NSF/ ANSI … (35) - ADA, ASME A112.18.1/
CSA B125.1, ASME A112.18.2/ CSA B125.2,… (61) - ADA, ASME A112.18.1/
CSA B125.1, ASME A112.18.6, ICC/ ANSI A… (83) - ADA, ASME A112.18.1/
CSA B125.1, ASSE 1016, ICC/ ANSI A117.1 (87) - ADA, ASME A112.18.1/
CSA B125.1, ASSE 1016, ICC/ ANSI A117.1… (160) - ADA, ASME A112.18.1/
CSA B125.1, EPA (40) - ADA, ASME A112.18.1/
CSA B125.1, EPA, IAPMO R and T (48) - ADA, ASME A112.18.1/
CSA B125.1, ICC/ ANSI A117.1 (473) - ADA, ASME A112.18.1/
CSA B125.1, ICC/ ANSI A117.1, EPA (182) - ADA, ASME A112.18.1/
CSA B125.1, ICC/ ANSI A117.1, IPC, NSF … (38) - ADA, ASME A112.18.1/
CSA B125.1, NSF 61/ 9/ 372, EPA, IAPMO R… (43) - ADA, ASME A112.18.1/
CSA B125.1/ B651, ICC/ ANSI A117.1, OBC (52) - ADA, ASME A112.18/
CSA B125.1 (49) - ADA, ASME A112.19.1/
CSA B45.2, ICC/ ANSI A117.1 (43) - ADA, ASME A112.19.2/
CSA B45.1, ICC/ ANSI A117.1 (79) - ADA, ASME A112.19.2/
CSA B45.1/ B651, ICC/ ANSI A117.1, OBC (35) - ADA, ASTM, CSA, ANSI (44)
- ADA, ICC/
ANSI A117.1 (147) - ANSI A112.19.3, Ada (80)
- ANSI A112.19.3M (213)
- ANSI A112.19.3M, Ada (191)
- ANSI A112.19.3M, Ada, Iapmo, Upc (68)
- ANSI A112.19.3M, Iapmo, Upc (34)
- ANSI Z97.1, CPSC 16CFR 1201 (105)
- ANSI/
ASME A112.19.2, CAN/ CSA B45 (43) - ANSI/
NSF 61 (41) - ASME A112.18.1, CSA B125.1 (132)
- ASME A112.18.1, CSA B125.1, ASSE 1016 (107)
- ASME A112.18.1, CSA B125.1, EPA (47)
- ASME A112.18.1, ICC/
ANSI A117.1, CSA B125.1 (35) - ASME A112.18.1, NSF 372, CUPC, IAPMO (39)
- ASME A112.18.1, NSF 372, CUPC, IAPMO, ASSE 1010 (37)
- ASME A112.18.1/
A112.18.3/ CSA B125.1, EPA (34) - ASME A112.18.1/
CSA B125.1 (394) - ASME A112.18.1/
CSA B125.1, EPA (175) - ASME A112.18.2-2005/
CSA B125.2-05 (82) - ASME A112.18.2/
CSA B125.2 (105) - ASME A112.19.1/
CSA B45.2 (231) - ASME A112.19.2, CSA, UPC (39)
- ASME A112.19.2/
CSA B45.1 (141) - ASME A112.19.3, Csa B45.4 (77)
- ASME A112.19.3/
CSA B45.4 (96) - ASME A112.19.3/
Csa B45.4, ANSI/ Icc A117.1, Ada, Upc, Iapmo (412) - ASME A112.19.3/
Csa B45.4, Cupc, Iapmo (70) - ASME A112.19.3/
Csa B45.4, Iapmo, Cupc, Ipc, Npc (149) - ASME A112.36.2M (78)
- ASME A112.6.3 (412)
- ASME A112.6.3, UPC (42)
- ASME A112.6.3-01, ASTM D2665/
D2661 (34) - ASTM D2000 (63)
- ASTM E162/
E662, CSA B45.5/ IAPMO Z124, UL 2818 (42) - Ada (639)
- Ada, ANSI A112.19.3, Csa, Upc/
Iapmo (46) - Ada, ANSI A112.19.3M, NSF/
ANSI 61, Ul (48) - Ada, ANSI A112.19.3M, Ul, NSF/
ANSI 61 (229) - Ada, ASME A112.19.3/
Csa B45.4, ANSI/ Icc A117.1, Iapmo, Cup… (60) - Ada, ASME A112.19.3/
Csa B45.4, Icc A117.1, Cupc, Iapmo (74) - CA/
VT (342) - CSA (64)
- CSA (Canada and US), SSPMA (51)
- CSA B45.5/
IAPMO Z124 (54) - CUPC (48)
- CUPC, IAPMO (94)
- Csa B45.5/
Iapmo Z124, Iapmo, Cupc, Ipc, Npc (40) - EPA (45)
- FM, UL (Canada and US) (40)
- FM, UL, ULC (1182)
- ISO 9001 (62)
- MSS SP-110 (81)
- MSS SP-80 (159)
- MSS-SP-80 (46)
- NSF (382)
- NSF 14, CUPC, CSA (41)
- NSF 372, IAPMO, CUPC (98)
- NSF/
ANSI 14/ 61, CSA B137.5/ B214, CAN/ ULC S101/ S102.2, UL 2… (44) - NSF/
ANSI 14/ 61/ 372 (71) - NSF/
ANSI 61, UL (Canada and US), CUPC, FM (55) - NSF/
ANSI 61, UL (Canada and US), FM, CUPC (36) - NSF/
ANSI 61/ 372 (51) - NSF/
ANSI 61/ 372/ Z1157, MSS SP-110, IAPMO (45) - UL (74)
- UL (Canada and US) (124)
- UL (Canada and US), FM (63)
- UL 441 (82)
- UL 962, CSA C22.2, ETL (35)
- UL, CSA (114)
- UL, FM, ULC (722)
- UL, ULC (45)
- UPC (82)
- Ul (Canada And Us), ANSI/
NSF 61, Ari 1010, Ada (51) - Ul (Canada And Us), NSF/
ANSI 61, Ada, Ari 1010 (88) - Ul (Canada And Us), NSF/
ANSI 61, Ari 1010 (294)
- Application
- Commercial and Residential Sewage (2)
- Commercial, On-Site Waste Water System, Liquid Waste Trans… (1)
- Dewatering (1)
- Dewatering Pump (6)
- Dewatering and Filling (1)
- General Water Transfer, Draining Water Heater, Boosting Wa… (1)
- Groundwater Protection System (1)
- High Head (1)
- Home, Basement, Crawl Space Area (1)
- Multi-Unit Residential and Commercial (1)
- Residential (5)
- Residential Sewage (2)
- Residential Wastewater, Light Commercial, 2 Inch Sewage Ej… (1)
- Residential and Commercial (2)
- Residential and Commercial Sewage (1)
- Residential, Sewage System (3)
- Basin Capacity
- Basin Dimensions
- Casing Material
- Collection
- Cutter Material
- Discharge Head
- 0 to 20 Foot (1)
- 0 to 24 Feet (1)
- 0 to 24 Foot (2)
- 105 Foot (1)
- 108 Foot (1)
- 110 Foot (1)
- 19 Foot (1)
- 20 Foot (1)
- 21 Foot (4)
- 22 Foot (1)
- 24 Foot (1)
- 25 Feet (1)
- 25 Foot (2)
- 26 Feet (1)
- 28 Foot (1)
- 29 Foot (1)
- 33 Foot (1)
- 37 Foot (1)
- 39 Foot (1)
- 48 Foot (1)
- 5 to 22 Foot (1)
- 50 Feet (1)
- 50 Foot (1)
- 53 Foot (2)
- 55 Feet (1)
- 55 Foot (4)
- 65 Foot (1)
- Discharge Size
- End Connection
- 2 Inch Flanged Outlet (1)
- Female Threaded Outlet (11)
- Female Threaded Outlet, 1-1/
2 Inch Female Threaded Flange (1) - Flanged (1)
- Flanged (Outlet) (1)
- Flanged Outlet (3)
- Garden Hose Outlet (1)
- Hub Inlet (2)
- Hub x Female Threaded (2)
- Hub x Threaded (3)
- No Hub (Inlet) (1)
- No Hub Inlet (2)
- No Hub x Threaded (2)
- Threaded (1)
- Threaded Outlet (2)
- Exclusions
- Float Type
- Adjustable Mechanical, Piggyback, Automatic (1)
- Adjustable, Mechanical (1)
- Adjustable, Wide Angle, Automatic (2)
- Automatic (1)
- Automatic, Piggyback (1)
- Integral Vertical Magnetic (1)
- Mechanical (2)
- Piggyback (2)
- Single Float Mechanical Level Control (1)
- Single/
Double Piggyback Variable Level (1) - Vertical Float Switch (1)
- Vertical Magnetic (2)
- Vertical Magnetic, Automatic (1)
- Wide Angle (5)
- Wide Angle Piggyback (5)
- Flow Rate
- 0 to 140 GPM (2)
- 0 to 45 GPM (1)
- 100 GPM (1)
- 118 GPM at 10 Foot (1)
- 125 GPM at 5 Foot (2)
- 125 GPM at 6 Foot (1)
- 141 GPM (1)
- 141 GPM at 5 Foot (1)
- 144 GPM (1)
- 144 GPM at 5 Foot (1)
- 160 GPM (1)
- 160 GPM at 12 Foot (1)
- 197 GPM at 15 Foot (1)
- 28 GPM at 30 Foot (2)
- 32 GPM (1)
- 3300 GPH (1)
- 35 GPM (1)
- 37 GPM (1)
- 41 Gallon (2)
- 44 GPM (1)
- 50 GPM (3)
- 50 GPM at 10 Foot (1)
- 6 to 39 GPM (1)
- 62 GPM at 5 Foot (1)
- 76 GPM at 15 Foot (4)
- 78 GPM at 5 Foot (1)
- 92 GPM (1)
- Housing Material
- Cast Iron (5)
- Class 25 Cast Iron (6)
- Class 25 Epoxy Powder Coat Painted Cast Iron (1)
- Class 25 Epoxy Powder Coated Cast Iron (1)
- Class 30 Cast Iron (1)
- Deep Finned Powder Coated Aluminum, Polypropylene (1)
- Deep-Finned Powder Coated Aluminum (2)
- Engineered Plastic (2)
- Engineered Plastic (Pump) (1)
- Epoxy Powder Coated Cast Aluminum (1)
- Epoxy-Powder Coat Cast Iron (1)
- Polyethylene (3)
- Powder Coated Cast Iron (6)
- Powder Coated Class 25 Cast Iron (3)
- Stainless Steel (5)
- Impeller Design
- Impeller Material
- Inclusions Features
- 6 Foot DC Charging Cable, Battery, 8 Foot Wire with 2 Posi… (1)
- Assembled System with Piping, Rubber Pipe Seal, Discharge … (1)
- Automatic System, Anti-Flotation Collar, Molded Torque-Sto… (1)
- BUNA N Elastomer, Stainless and Brass Fastener, Upper and … (1)
- Buna-N O-Ring (1)
- Buna-N O-Ring Gasket, Mechanical Switch (1)
- Cast Iron Impeller, Advanced V-Slice Cutting System, Autom… (1)
- Check Valve Included on Primary Pump and Back-Up Pump, 1-1… (1)
- Corrosion Resistant Impeller, Permanently Lubricated Ball … (1)
- Fastener, Permanently Lubricated Ball Bearing (5)
- Fully Assembled, Unique Debris Filter Tray, Available with… (1)
- High Water Indoor Alarm, 1-1/
4 Inch Silent Check Valve, St… (1) - Integral Carry Handle, Garden Hose Adapter and Suction Scr… (1)
- Integrated Rubber Seals, Unique Cord Seal Technology, Inte… (1)
- Matching Duplex Control Panel (1)
- Molded Torque Stops for Pump Security, Schedule 80 PVC Dis… (1)
- NEMA 4X Weatherproof Enclosure, Float-Less Level Sensor, R… (1)
- NEMA 4X Weatherproof Enclosure, Float-Less Level Sensor, R… (1)
- Non-Corrosive Stainless Steel Fastener (1)
- Peripheral Port Inlet, 300 Stainless Steel Intake Plate, V… (1)
- Peripheral Port Inlet, 300 Stainless Steel Intake Plate, V… (1)
- Permanently Lubricated Bearing (1)
- Permanently Lubricated Upper and Lower Ball Bearing, Stain… (1)
- Permanently Lubricated Upper and Lower Bearing, Removable … (1)
- Permanently Lubricated Upper and Lower Bearing, Removable … (1)
- Pre-Mounted Float Switch, Closet Flange, Schedule 80 PVC D… (1)
- QuickTree Float System, Clear Construction Cover, Anti-Flo… (1)
- QuickTree Technology, Integral Rubber Seal, Inspection Cov… (1)
- QuickTree Technology, Integral Rubber Seal, Inspection/
Acc… (1) - Schedule 40 PVC Discharge Pipe, Gasket Sealed Cover, Gaske… (1)
- Separate Access Cover, Anti-Flotation Collar, Schedule 80 … (1)
- Separate Access Cover, Schedule 80 PVC Piping, Float, Rubb… (1)
- Stainless Steel Bottom Removable Screen, Stainless Steel F… (1)
- Stainless Steel Fastener (1)
- Stainless Steel Fastener, Quick Connect Power Cord, Ball B… (1)
- Standard Garden Hose, 1 Inch Threaded Pipe or 1-1/
4 Inch S… (1) - Unique 1-Piece Cast Body Eliminates Motor Housing Seal Rin… (1)
- Upper and Lower Ball Bearing, All stainless-Steel Fastener… (1)
- Upper and Lower Ball Bearing, Class 30 Cast Iron Volute, M… (1)
- Upper and Lower Ball Bearing, Stainless-Steel and Brass Fa… (1)
- Upper and Lower Ball Bearing, V-Slice Cutter Technology, S… (1)
- Input Supply Rating
- 115 Volt (2)
- 115 Volt 1 Phase at 60 Hertz 7 Amp (1)
- 115 Volt 1-Phase 12 Amp (1)
- 115 Volt AC 1-Phase (1)
- 115 Volt AC 1-Phase 12 Amp (3)
- 115 Volt AC 1-Phase 12 Amp (Full Load) (1)
- 115 Volt AC 12 Amp 1-Phase (1)
- 115 Volt AC 5.2 Amp (1)
- 115 Volt AC 60 Hertz 1-Phase (1)
- 115 Volt AC 60 Hertz 1-Phase 1.5 to 6 Amp (1)
- 115 Volt AC 60 Hertz 1-Phase 12 Amp (5)
- 115 Volt AC 60 Hertz 1-Phase 12 Amp (Full Load)/
22.5 Amp (… (1) - 115 Volt AC 60 Hertz 5.2 Amp (5)
- 115 Volt AC 60 Hertz 6 Amp (3)
- 115 Volt AC 60 Hertz 7.5 Amp (1)
- 115 Volt AC 60 Hertz 8 Amp (1)
- 115 Volt AC 60 Hertz, 1-Phase, 12 Amp (1)
- 12 Volt (1)
- 208 to 230 Volt AC 1-Phase 5.3/
13 Amp (1) - 208 to 230 Volt AC 1-Phase 6 Amp (Full Load)/
28.6 Amp (Loc… (1) - 208 to 230 Volt AC 60 Hertz 1-Phase 15 Amp (1)
- 208 to 230 Volt AC 60 Hertz 1-Phase 6 Amp (Full Load)/
13.5… (1) - 208 to 230 Volt AC 60 Hertz 1-Phase 6.5 Amp (3)
- 208 to 230 Volt AC 60 Hertz 1-Phase 6.8 Amp (Full Load)/
12… (1) - 208 to 230 Volt AC 60 Hertz 1-Phase 8 Amp (1)
- 208 to 230 Volt AC 60 Hertz 1-Phase 8.2 Amp (1)
- 208 to 230 Volt AC 60 Hertz 4 Amp (1)
- 208 to 230 Volt, 8 Amp, 1-Phase (1)
- 208/
230 Volt AC 1-Phase 60 Hertz (1) - 208/
230 Volt AC 1-Phase, 8 Amp Full Load, 22.3 Amp Locked … (1) - 208/
230 Volt AC 60 Hertz 1-Phase (2) - 230 Volt AC 60 Hertz 1-Phase 12 Amp (Full Load)/
28.6 Amp (… (1) - 230 Volt AC 60 Hertz 1-Phase 6 Amp (1)
- 230 Volt AC 60 Hertz 1-Phase 6 Amp (Full Load)/
23.7 Amp (L… (1) - 5 Amp at 115 Volt AC 60 Hertz 1-Phase (1)
- Material
- Model No. (Corrected)
- 1100 (2)
- 230 (2)
- 240 (3)
- 250 (2)
- 280 (1)
- 290 (1)
- 331 (1)
- 42 (1)
- 450 (1)
- 508 (1)
- 915 (1)
- AQUA-MATE, M76 (1)
- CSP (1)
- D3600 (1)
- D3648LSG (1)
- D3672 (1)
- FL50 (5)
- FL60 (1)
- LE100 (2)
- LE40 (1)
- LE50 (3)
- LE70 (3)
- LEH100 (1)
- LSG200 (1)
- LowPro (1)
- PC (1)
- PRG (2)
- Pro370 (2)
- Pro380 (3)
- Pro380-SD (2)
- SBX (1)
- SPAC (1)
- Motor Type
- Class B Insulation, Oil Filled, Thermal Overload Protection (1)
- Oil Filled (3)
- Oil Filled, Class B Insulation and NEMA B Design (3)
- Oil Filled, Hermetically Sealed (2)
- Oil Filled, Hermetically Sealed and Thermal Overload Prote… (1)
- Oil Filled, Hermetically Sealed, Thermal Overload Motor (1)
- Oil Filled, Hermetically Sealed, Thermal Overload Protection (6)
- Oil Filled, Hermetically Sealed, Thermally Protected and P… (1)
- Oil Filled, Thermally Protected, CSCR, Class B Winding (1)
- Oil Filled, Thermally Protected, Hermetically Sealed (3)
- Oil-Filled Motor with Thermal Overload Protection (1)
- Oil-Filled, Hermetically Sealed Motors with Thermal Overlo… (1)
- Oil-Filled, Hermetically Sealed, Thermal Overload Protection (5)
- Oil-Filled, Hermetically Sealed, Thermally Overload Protec… (1)
- Oil-Filled, Hermetically Sealed, Thermally Protected and P… (1)
- PSC, Oil-Filled, Thermal Overload Protection (1)
- Permanent Split Capacitor (1)
- Thermal Overload Protection (2)
- Thermal Overload Protection, Hermetically Sealed, Oil Fill… (1)
- Thermally Protected (2)
- Options
- Overall Dimensions
- 10 Inch Width x 13 Inch Height (1)
- 11-13/
32 Inch Length x 5-5/ 8 Inch Width x 5-1/ 5 Inch Height (1) - 11.1 Inch Length x 7.2 Inch Width (1)
- 11.1 Inch Length x 7.2 Inch Width x 17.6 Inch Height (1)
- 11.2 Inch Width x 16.4 Inch Height (6)
- 11.5 Inch Width x 14 Inch Height (2)
- 12.5 Inch Width x 18.9 Inch Height (5)
- 12.5 Inch Width x 9 Inch Depth x 18.9 Inch Height (1)
- 14 Inch Height (2)
- 16-1/
2 Inch Width x 15 Inch Height (1) - 17 Inch Length x 6-5/
8 Inch Width x 20-7/ 8 Inch Height (2) - 21 Inch Width x 30 Inch Height (1)
- 24 Inch Diameter x 24 Inch Height (1)
- 25 Inch Diameter x 24 Inch Height (1)
- 25 Inch Length (1)
- 26-1/
2 Inch Width x 25-1/ 2 Inch Height (1) - 32 Inch Length x 24 Inch Width x 18-3/
4 Inch Height (1) - 36 Inch x 48 Inch Basin (1)
- 9 Inch Width x 10 Inch Height (3)
- 9-1/
16 Inch Length x 7-1/ 8 Inch Width x 12-5/ 8 Inch Height (1) - 9-1/
2 Inch Width x 19-1/ 2 Inch Height (1) - 9-3/
4 Inch Length x 4-1/ 2 Inch Width x 7 Inch Height (1) - 9-3/
5 Inch Width x 10-1/ 2 Inch Height (2) - 9.5 Inch Length x 6.3 Inch Width x 13 Inch Height (1)
- 9.6 Inch Width x 10.5 Inch Height (2)
- 9.6 Inch Width x 12.5 Inch Height (1)
- Power Cord Length
- Power Rating
- Shaft Material
- Shaft Seal Details
- Carbon and Ceramic (1)
- Carbon and Ceramic, Single (1)
- Carbon/
Ceramic (3) - Carbon/
Ceramic Mechanical Seal (2) - Carbon/
Ceramic, Unitized (1) - Ceramic/
Carbon Unitized Seal (1) - Hermitically Seal (2)
- Integral Rubber (1)
- Unitized Carbon/
Ceramic (1) - Unitized Carbon/
Ceramic Design with Buna-N Elastomer and S… (5) - Unitized Ceramic Carbon (2)
- Unitized Ceramic Carbon Mechanical Seal (1)
- Unitized Ceramic Carbon Seal (1)
- Unitized Ceramic/
Carbon (3) - Unitized Mechanical Silicon Carbide (1)
- Unitized Silicon Carbide (1)
- Unitized Silicon Carbide Mechanical Seal (4)
- Solid Size
- Speed Rating
- Starts Per Hour
- Suction Size
- Temperature Rating
- 100 Deg F (Continuous Duty), 140 Deg F (Intermittent ) (5)
- 104 Deg F (1)
- 104 Deg F (Continuous Duty), 140 Deg F (Intermittent), 266… (1)
- 104 Deg F (Continuous Duty), 140 Deg F (Intermittent), 266… (1)
- 110 Deg F (1)
- 135 Deg F (1)
- 140 Deg F (17)
- 140 Deg F (Fluid) (2)
- 140 Deg F (Fluid), 221 Deg F (Thermal Overload) (1)
- 140 Deg F (Fluid), 221 Deg F (Thermal Overload), 105 Deg C… (1)
- 140 Deg F (Fluid), 248 Deg F (Thermal Overload) (1)
- 140 Deg F (Fluid), 266 Deg F (Stator), 221 Deg F (Thermal … (1)
- 140 Deg F (Intermittent), 104 Deg F (Continuous) (1)
- 140 Deg F (Liquid) (1)
- 140 Deg F (Liquid), 105 Deg C (Stator), 221 Deg F (Thermal… (1)
- 140 Deg F Liquid (1)
- 221 Deg F (Thermal Overload) (3)
- 221 Deg F (Thermal Overload)/
140 Deg F (Liquid)/ 266 Deg F … (1) - 248 Deg F (Thermal Overload) (1)
- Type
- 1-Piece, Heavy Duty (1)
- 1-Piece, Uni-Body (2)
- 2-Pole, Automatic (1)
- Assembled (1)
- Automatic (1)
- Automatic, Submersible (1)
- Duplex (1)
- Duplex, Pre-Assembled (1)
- Low Profile, Freestanding (1)
- Manual (1)
- Pre-Assembled Duplex (1)
- Pre-Assembled, Duplex (2)
- Simplex (3)
- Submersible (13)
- Submersible, Automatic (3)
- Submersible, Automatic, 1-Stage, Wide Angle Float, 1-Piece (1)
- Submersible, Automatic, Wide Angle Float Switch (1)
- Submersible, Automatic/
Non-Automatic (1) - Submersible, Cool Running (1)
- Submersible, Heavy Duty (1)
- Submersible, High Head (1)
- Submersible, Mid-Range (5)
- Submersible, Multi-Stage (1)
- Submersible, Quick-Connect Cord, Automatic (1)
- Submersible, Simplex (1)
- Submersible, Unique, 1-Piece (2)
- Vent Connection
- Warranty + Show All Refinements
All Products
Page Loading...
Can't find what you are looking for?
Please fill out our non-stock/special order form and we'll get right back to you. Thanks!