Refine Results
- Brand
- Product Type
- Access Panel (1)
- Air Gap Drain (3)
- Anti Freeze (1)
- Backwater Valve (4)
- Bar Sink (2)
- Bathtub Protector (1)
- Bell Trap Drain (1)
- Boiler Liquid (1)
- Boiler Solder (1)
- Cap Fitting (4)
- Check Valve (3)
- Closet Flange (3)
- Closet Flange Spacer (1)
- Closet Wax Bowl Ring (1)
- Dam Corner (1)
- Drain Strainer (4)
- End Preparation Tool (1)
- Flame Protector (1)
- Floor Sink Top Grate (2)
- Gate Valve (4)
- Kitchen Sink (3)
- Leak Detector (1)
- Offset Drain (1)
- Pressure Regulator (1)
- Snap-In Drain (2)
- Solvent (1)
- Strainer (2)
- Thread And Gasket Sealant (1)
- Trap Offset (1)
- Tub Box (1)
- Tube Fitting Nut (1)
- Washing Machine Outlet Box Pan (1)
- Water Detector Shutoff (1)
- Water Heater Detector Shut-Off (1)
- Water Heater Pan (2)
- Water Heater Pan Adapter (1)
- Water Heater Stand (1)
- Actuation Type
- Additional Information
- Application DWV Pipe (1)
- Boiling Point 160 Deg F; Specific Gravity 1.017 to 1.058; … (1)
- Bottom Inner Dimension 11-1/
2 Inch x 11-1/ 2 Inch (1) - CARTON WEIGHT 3 LB; 12 PIECES PER PACK; FOR 4 INCH SNAP-IN… (1)
- COLOR BLACK; WEIGHT 1.7 LB; PACKAGING QUANTITY 4 PER CARTON (1)
- Color White (3)
- End Connection 3/
4 Inch Female Threaded x 3/ 4 Inch Female … (2) - Frame Size to Outer Flange 8-1/
4 Inch Width x 11-1/ 4 Inch … (1) - Height 5.25 Inch (1)
- INCLUDES SLEEVE; SPECIFIC GRAVITY 0.82 TO 0.86; MELTING PO… (1)
- Includes 1 Inch PVC Adapter; Packaging Type Bulk (1)
- Includes Non-Skid Foampad, Deep Fluted Sidewall (1)
- Includes Washer (1)
- Lead-Free (3)
- Length 9-1/
2 Inch; Includes (2) Brass Nut, (2) Rubber Wash… (1) - Minimum Cabinet Size 39"; Warranty Lifetime Limited (1)
- Packaging Type Carded (2)
- Pan Depth 2-1/
2 Inch (1) - Pan Depth 2-1/
2 Inch; Includes 1 Inch PVC Fitting; Packagi… (1) - Physical State Liquid; Color Blue; Boiling Point 220 Deg F… (1)
- Physical State Solid; Form Powder; Odor Slight; Specific G… (1)
- Pressure Rating 12000 PSI (Hydraulic), 2600 PSI (Gas); Phy… (1)
- SHEET TO SHEET BONDING; WITH DAUBER (1)
- Strainer Size 4-1/
4 Inch; Application DWV (1) - Temperature Rating 2500 Deg F (1)
- Thickness 0.09 Inch; Color White (1)
- Thickness 1/
4 or 1/ 2 Inch (1) - Thickness 40 Mil; Installation Type Right/
Left Corner (1) - Total Open Area 37.2 Square Inch; Condensate Area 15.2 Squ… (1)
- Total Open Area 46.8 Square Inch; Condensate Area 32.1 Squ… (1)
- Used On RP4A 1/
2 Inch/ 3/ 4 Inch/ 1 Inch Backflow Preventer (1) - Used On RP4A Series 1-1/
4 to 1-1/ 2 Inch Backflow Preventer (1) - Used On RP4A Series 2 Inch Backflow Preventer (1)
- VALVE HUB FITS DWV PIPE (1)
- Warranty Lifetime Limited on Manufacture Defect (3)
- Warranty Lifetime Limited on Manufacture Defects (1)
- pH Value 6.4; Boiling Point 212 Deg F; Flash Point Less Th… (1)
- Applicable Standard
- ADA (423)
- ADA, ANSI/
ASME A112.19.2, CSA B45.3 (36) - ADA, ASME A112.18.1, ANSI/
ICC A117.1, CSA B125.1, CSA (CAN… (91) - ADA, ASME A112.18.1, CSA B125.1, ICC/
ANSI A117.1, NSF 61, … (273) - ADA, ASME A112.18.1, CSA B125.1, ICC/
ANSI A117.1, NSF 61, … (303) - ADA, ASME A112.18.1/
A112.18.2, CSA B125.1/ B125.2, ICC/ ANSI… (96) - ADA, ASME A112.18.1/
A112.18.6, CSA B125.1, ICC/ ANSI A117.1 (48) - ADA, ASME A112.18.1/
CSA B125.1 (215) - ADA, ASME A112.18.1/
CSA B125.1, ANSI/ ICC A117.1, NSF/ ANSI … (35) - ADA, ASME A112.18.1/
CSA B125.1, ASME A112.18.2/ CSA B125.2,… (61) - ADA, ASME A112.18.1/
CSA B125.1, ASME A112.18.6, ICC/ ANSI A… (83) - ADA, ASME A112.18.1/
CSA B125.1, ASSE 1016, ICC/ ANSI A117.1 (87) - ADA, ASME A112.18.1/
CSA B125.1, ASSE 1016, ICC/ ANSI A117.1… (160) - ADA, ASME A112.18.1/
CSA B125.1, EPA (40) - ADA, ASME A112.18.1/
CSA B125.1, EPA, IAPMO R and T (48) - ADA, ASME A112.18.1/
CSA B125.1, ICC/ ANSI A117.1 (473) - ADA, ASME A112.18.1/
CSA B125.1, ICC/ ANSI A117.1, EPA (182) - ADA, ASME A112.18.1/
CSA B125.1, ICC/ ANSI A117.1, IPC, NSF … (38) - ADA, ASME A112.18.1/
CSA B125.1, NSF 61/ 9/ 372, EPA, IAPMO R… (43) - ADA, ASME A112.18.1/
CSA B125.1/ B651, ICC/ ANSI A117.1, OBC (52) - ADA, ASME A112.18/
CSA B125.1 (49) - ADA, ASME A112.19.1/
CSA B45.2, ICC/ ANSI A117.1 (43) - ADA, ASME A112.19.2/
CSA B45.1, ICC/ ANSI A117.1 (79) - ADA, ASME A112.19.2/
CSA B45.1/ B651, ICC/ ANSI A117.1, OBC (35) - ADA, ASTM, CSA, ANSI (44)
- ADA, ICC/
ANSI A117.1 (147) - ANSI A112.19.3, Ada (80)
- ANSI A112.19.3M (213)
- ANSI A112.19.3M, Ada (191)
- ANSI A112.19.3M, Ada, Iapmo, Upc (68)
- ANSI A112.19.3M, Iapmo, Upc (34)
- ANSI Z97.1, CPSC 16CFR 1201 (105)
- ANSI/
ASME A112.19.2, CAN/ CSA B45 (43) - ANSI/
NSF 61 (41) - ASME A112.18.1, CSA B125.1 (132)
- ASME A112.18.1, CSA B125.1, ASSE 1016 (107)
- ASME A112.18.1, CSA B125.1, EPA (47)
- ASME A112.18.1, ICC/
ANSI A117.1, CSA B125.1 (35) - ASME A112.18.1, NSF 372, CUPC, IAPMO (39)
- ASME A112.18.1, NSF 372, CUPC, IAPMO, ASSE 1010 (37)
- ASME A112.18.1/
A112.18.3/ CSA B125.1, EPA (34) - ASME A112.18.1/
CSA B125.1 (395) - ASME A112.18.1/
CSA B125.1, EPA (175) - ASME A112.18.2-2005/
CSA B125.2-05 (82) - ASME A112.18.2/
CSA B125.2 (105) - ASME A112.19.1/
CSA B45.2 (231) - ASME A112.19.2, CSA, UPC (39)
- ASME A112.19.2/
CSA B45.1 (141) - ASME A112.19.3, Csa B45.4 (77)
- ASME A112.19.3/
CSA B45.4 (96) - ASME A112.19.3/
Csa B45.4, ANSI/ Icc A117.1, Ada, Upc, Iapmo (412) - ASME A112.19.3/
Csa B45.4, Cupc, Iapmo (70) - ASME A112.19.3/
Csa B45.4, Iapmo, Cupc, Ipc, Npc (149) - ASME A112.36.2M (78)
- ASME A112.6.3 (412)
- ASME A112.6.3, UPC (42)
- ASME A112.6.3-01, ASTM D2665/
D2661 (34) - ASTM D2000 (63)
- ASTM E162/
E662, CSA B45.5/ IAPMO Z124, UL 2818 (42) - Ada (639)
- Ada, ANSI A112.19.3, Csa, Upc/
Iapmo (46) - Ada, ANSI A112.19.3M, NSF/
ANSI 61, Ul (48) - Ada, ANSI A112.19.3M, Ul, NSF/
ANSI 61 (229) - Ada, ASME A112.19.3/
Csa B45.4, ANSI/ Icc A117.1, Iapmo, Cup… (60) - Ada, ASME A112.19.3/
Csa B45.4, Icc A117.1, Cupc, Iapmo (74) - CA/
VT (342) - CSA (64)
- CSA (Canada and US), SSPMA (51)
- CSA B45.5/
IAPMO Z124 (54) - CUPC (48)
- CUPC, IAPMO (94)
- Csa B45.5/
Iapmo Z124, Iapmo, Cupc, Ipc, Npc (40) - EPA (45)
- FM, UL (Canada and US) (40)
- FM, UL, ULC (1182)
- ISO 9001 (62)
- MSS SP-110 (81)
- MSS SP-80 (159)
- MSS-SP-80 (46)
- NSF (382)
- NSF 14, CUPC, CSA (41)
- NSF 372, IAPMO, CUPC (98)
- NSF/
ANSI 14/ 61, CSA B137.5/ B214, CAN/ ULC S101/ S102.2, UL 2… (44) - NSF/
ANSI 14/ 61/ 372 (71) - NSF/
ANSI 61, UL (Canada and US), CUPC, FM (55) - NSF/
ANSI 61, UL (Canada and US), FM, CUPC (36) - NSF/
ANSI 61/ 372 (51) - NSF/
ANSI 61/ 372/ Z1157, MSS SP-110, IAPMO (45) - UL (74)
- UL (Canada and US) (124)
- UL (Canada and US), FM (63)
- UL 441 (82)
- UL 962, CSA C22.2, ETL (35)
- UL, CSA (114)
- UL, FM, ULC (722)
- UL, ULC (45)
- UPC (82)
- Ul (Canada And Us), ANSI/
NSF 61, Ari 1010, Ada (51) - Ul (Canada And Us), NSF/
ANSI 61, Ada, Ari 1010 (88) - Ul (Canada And Us), NSF/
ANSI 61, Ari 1010 (294)
- Application
- Commercial, Mechanical and Industrial (3)
- DWV (1)
- Formulated for Use to Join Two Sheets of CPE Shower Pan Li… (1)
- Heating Boiler (1)
- Hydronic System, Steam and Hot Water Boiler (1)
- Mechanical and Industrial (4)
- Plumbing, Heating, Piping, Air Conditioning, Refrigeration… (1)
- Schedule 40 ABS Plastic or PVC DWV Pipe (3)
- Schedule 40 DWV Pipe (1)
- Schedule 40 DWV pipe (1)
- Steam, Hot Water Heating Boiler, Powdered Leak Stopper (1)
- Toilet, Boat, Trailer (1)
- Tubing, Valve, Cylinder, Pressure Tank, Pipeline, Fittings (1)
- Tubular Drain (1)
- Body Material
- Bonnet Material
- Bonnet Type
- Bowl Dimensions
- CAS Registry No.
- Cap Material
- Cap Style
- Capacity
- Collection
- Connection Type
- Container Capacity
- Container Size
- Container Type
- Cover Type
- Detection Method
- Disc Material
- Door Material
- Door Size
- Drain Connection
- Drain Material
- Drain Size
- End Connection
- End To End Distance
- Features
- Handle Material
- Height
- Inclusions Features
- 1 Inch PVC Adapter (1)
- 27 Inch Minimum Cabinet Size, Mounting Bracket (1)
- 4 Inch Stainless Steel Strainer (1)
- Bracket (1)
- Brass Eyelet (1)
- Fiber and Rubber Gasket, (2) Screws (1)
- Hanger Pin/
Side Plug/ Disc Nut Plug ASTM B16 C36000 Brass A… (3) - Integral Check and Stainless Steel Strainer, Adjustment Sc… (1)
- Leakproof, Distinctive Non-Runny Consistency, Grit-Free, N… (1)
- Mounting Bracket (1)
- Mounting Bracket, Quiet Coat Sound Deadening Technology (2)
- Outside Screw and Yoke, Bronze Mounted, Stem Pack Ring (4)
- Receptor Base, Rubber Gasket, Fiber Slip Washer (1)
- Screw-On 3-1/
2 Inch Stainless Steel Strainer (1) - Strainer Snap (1)
- Threaded Cover, Valve Flapper (4)
- Item
- Latch Type
- Length
- MSDS No.
- Material
- 17 Gauge Brass (1)
- 18 Gauge Steel (1)
- 28 Gauge Aluminum (1)
- 304 Stainless Steel (2)
- ABS Plastic (6)
- Aluminum (1)
- Brass (1)
- Cast Iron (1)
- Copper Silicon Alloy, Brass (Stem) (2)
- Fiber (Body), Polycarbonate (Sleeve) (1)
- High Impact Plastic (1)
- High Impact Polystyrene (2)
- PVC (6)
- Stainless Steel (9)
- Zoltek Pyron Fiber (1)
- Material Thickness
- Model No. (Corrected)
- Mounting Type
- No. Of Holes
- Nominal Size
- Operation
- Outlet Type
- Overall Top Size
- PH Value
- Physical Form
- Pipe Size
- Pressure Rating
- Rough In
- Schedule
- Seal Material
- Seat Material
- Shape
- Size
- 1 Inch Inside Diameter x 1-1/
2 Inch Outside Diameter (1) - 1-1/
2 Inch x 1-1/ 2 Inch (2) - 1/
4 Inch (1) - 12 Inch Length x 9 Inch Width (1)
- 13 Inch x 13 Inch Top Inner Dimension x 6-1/
2 Inch Depth (1) - 21 Inch Length x 21 Inch Width x 18 Inch Height (1)
- 28 Inch Inner Diameter x 29 Inch Outer Diameter (1)
- 30 Inch Inner Diameter x 31 Inch Outer Diameter x 2-1/
2 In… (1) - 30 Inch Length x 28 Inch Width x 2.5 Inch Depth (1)
- 4 Inch (3)
- 57 Inch Length x 15 Inch Depth (1)
- 9.15 Inch Length x 9.15 Inch Width x 0.75 Inch Thickness (2)
- 1 Inch Inside Diameter x 1-1/
- Stem Material
- Strainer Material
- Strainer Size
- Strainer Thickness
- Strainer Type
- Temperature Rating
- Top Shape
- Type
- All Purpose, Air, Gas, Oxygen Pressure (1)
- Bagged, Heat Shield (1)
- Bell Trap (1)
- End (1)
- Fast Fill, Straight (1)
- Flat Round, Screw-Tite (1)
- Flexible, Universal (1)
- Half, Light Duty (1)
- Horizontal, Swing, Straight, Domestic (3)
- Inset Test (3)
- Inset, Test (1)
- Liquid (1)
- Non-Metallic Powder (1)
- Offset (1)
- Pre-Cut, Side Opening (1)
- Regular (1)
- Reinforced (1)
- Round (3)
- Round Drain (1)
- Round, Snap-In (1)
- Round, Universal (2)
- Semi-Flexible (1)
- Sewer (4)
- Single Bowl (5)
- Snap-In (2)
- Solid Wedge, Multi-Turn, Domestic (4)
- Square (1)
- Square, Light Duty (1)
- Standard, Semi-Flexible (1)
- Straight (2)
- Virgin Propylene Glycol (1)
- Used On Item
- 14 Inch Bathtub (1)
- Bath Tub (1)
- Closet Flange (1)
- Electric/
Gas Water Heater (1) - Floor Sink (2)
- Gas Water Heater (1)
- Propane and Max Power Propylene Gas Torch (1)
- Shower Drain (6)
- Sink Strainer, Brass Tubular (1)
- Tile Shower Pan Liner (1)
- Toilet (2)
- Toilet, 3 Inch or Inside of 4 Inch Schedule 40 DWV Pipe (1)
- Washing Machine (1)
- Water Heater (3)
- Water Heater Pan (1)
- Used On Model Brand
- Wedge Material
- Width + Show All Refinements
All Products ISO 9001
All Products
Page Loading...
Can't find what you are looking for?
Please fill out our non-stock/special order form and we'll get right back to you. Thanks!