Refine Results
- Brand
- Product Type
- Additional Information
- Current Rating 12.5 Amp (Locked Rotor) (1)
- Current Rating 23 Amp (Locked Rotor) (2)
- Current Rating 24 Amp (Locked Rotor) (2)
- Current Rating 24.1 Amp (Locked Rotor) (1)
- Current Rating 48.6 Amp (Locked Rotor) (1)
- Enclosure Type NEMA 1 (1)
- Finish Epoxy Powder Coated (1)
- Finish Epoxy Powder Coated; Current Rating 23 Amp (Locked … (1)
- Finish Epoxy Powder Coated; Locked Rotor Current Rating 10… (4)
- Finish Epoxy Powder Coated; Locked Rotor Current Rating 12… (1)
- Finish Epoxy Powder Coated; Locked Rotor Current Rating 23… (1)
- Finish Epoxy Powder Coated; Sump Diameter 10 Inch; Current… (1)
- Finish Powder Coated; Locked Rotor Current Rating 28.5 Amp… (1)
- Finish Powder Coated; Plug-End Type Series Plug; Power Cor… (1)
- Material Class 25 Cast Iron (Volute), Buna N (O-Ring), Sta… (1)
- Power Cord Type SJEOOW (1)
- Power Cord Type SJTW (2)
- Power Cord Type SJTW; Shut-Off Head Size 37 Foot (1)
- Sump Diameter 10 Inch (1)
- Switch Type Automatic; Plug-End Type Series Plug (1)
- Switch Type Manual (4)
- Applicable Standard
- ASME A17.1, UL/
CSA (Canada and US), SSPMA (1) - CSA (Canada and US) (1)
- CSA (Canada and US), ISO 9001, SSPMA (7)
- CSA (Canada and US), SSPMA (8)
- CSA (Canada and US), SSPMA, ISO 9001 (9)
- CSA (Canada and US), UL (1)
- SSPMA, ISO 9001 (1)
- UL, CSA (Canada and US), SSPMA (1)
- UL, CSA (Canada and US), SSPMA, ISO 9001 (1)
- UL, SSPMA, ISO 9001 (1)
- ASME A17.1, UL/
- Application
- Commercial, On-Site Waste Water System, Liquid Waste Trans… (2)
- Dewatering (1)
- Dewatering Pump (6)
- Elevator, Garage (1)
- Heavy Duty Commercial, Waste Water System and Liquid Waste… (4)
- Hot Water, Boiler Blowdown Pit, Condensate Pit (1)
- Hot Water, Boiler Blowdown Pit, Hot Water Transfer, Conden… (1)
- Liquid Waste Transfer (1)
- Mound System, STEP System, Liquid Waste Transfer and Head … (1)
- On Site Waste Water System, Liquid Waste Transfer, Commerc… (1)
- Step System, LPP System, Mound System, Liquid Waste Transf… (1)
- Step System, Mound System, Liquid Waste Transfer and Highe… (1)
- Waste Water System, Liquid Waste Transfer and Commercial H… (2)
- Casing Material
- Collection
- Discharge Head
- Discharge Size
- End Connection
- Float Type
- Automatic (1)
- Integral Vertical (1)
- Integral Vertical Magnetic (1)
- Integral Vertical Magnetic, Piggy Back (1)
- Mechanical (1)
- Piggy Back (3)
- Piggyback (5)
- Piggyback, Wide Angle (1)
- Vertical Magnetic, Automatic (1)
- Wide Angle (2)
- Wide Angle Piggyback (5)
- Wide Angle Tilt (1)
- Wide Angle Tilt, Piggy Back (1)
- Wide Angle/
Integral (1)
- Flow Rate
- Housing Material
- Impeller Design
- Impeller Material
- Inclusions Features
- Buna-N O-Ring (2)
- Buna-N O-Ring, Stainless Hardware, Stainless Steel Fastene… (1)
- Buna-N O-Ring, Stainless Steel Fastener, Automatic System (1)
- Control, Remote Alarm, Easy Clamp Mount Installation, Plug… (1)
- Corrosion Resistant, Stainless Steel Removable Bottom Screen (1)
- Fastener, Permanently Lubricated Ball Bearing (5)
- Permanently Lubricated Upper and Lower Ball Bearing, Buna-… (2)
- Plug, Ball Bearing, Fastener, Stainless Steel Bottom Scree… (4)
- Quick-Disconnect Power Cord, Ball Bearing, Stainless Steel… (2)
- Stainless Steel Bottom Removable Screen, Stainless Steel F… (2)
- Stainless Steel Fastener (1)
- Stainless Steel Hardware, Buna-N O-Ring (1)
- Stainless Steel Hardware, Buna-N O-Ring, 300 Stainless Ste… (1)
- Upper and Lower Ball Bearing, Buna-N O-Ring, Stainless Ste… (3)
- Upper and Lower Ball Bearing, Buna-N O-Ring, Stainless Ste… (1)
- Upper and Lower Ball Bearing, Buna-N O-Ring, Stainless Ste… (1)
- Input Supply Rating
- 115 Volt AC 1-Phase 12 Amp (1)
- 115 Volt AC 60 Hertz 1-Phase 10.4 Amp (5)
- 115 Volt AC 60 Hertz 1-Phase 10.5 Amp (1)
- 115 Volt AC 60 Hertz 1-Phase 10.5 Amp (Full Load)/
26 Amp (… (1) - 115 Volt AC 60 Hertz 1-Phase 12 Amp (3)
- 115 Volt AC 60 Hertz 1-Phase 12 Amp (Full Load)/
23 Amp (Lo… (1) - 115 Volt AC 60 Hertz 1-Phase 8 Amp (2)
- 115 Volt AC 60 Hertz 1-Phase 8 Amp (Full Load)/
23 Amp (Loc… (2) - 115 Volt AC 60 Hertz 1-Phase 8/
23 Amp (1) - 115 Volt AC 60 Hertz 10.4 Amp (1)
- 115 Volt AC 60 Hertz 12 Amp 1-Phase (1)
- 115 Volt AC 60 Hertz 8 Amp (1)
- 208 to 230 Volt AC 1-Phase 5.3/
13 Amp (1) - 208 to 230 Volt AC 1-Phase 60 Hertz 5.3 Amp (1)
- 208 to 230 Volt AC 60 Hertz 1-Phase 12 Amp (1)
- 208 to 230 Volt AC 60 Hertz 1-Phase 4 Amp (1)
- 208 to 230 Volt AC 60 Hertz 1-Phase 6.5 Amp (3)
- 208 to 230 Volt AC 60 Hertz 1-Phase 8.2 Amp (2)
- 208 to 230 Volt AC 60 Hertz 4 Amp (2)
- Model No. (Corrected)
- Motor Type
- Class B Insulation, Oil Filled Permanent Split Capacitor, … (7)
- NEMA B Class B Insulation, Hermetically Sealed, Oil Filled… (1)
- NEMA B Class F Insulation, Thermal Overload Protection, Oi… (1)
- NEMA B Insulated Class B, Oil Filled, Permanent Split Capa… (1)
- Oil Filled Hermetically Seal (1)
- Oil Filled, Capacitor Start, Class B Insulated, NEMA B Des… (1)
- Oil Filled, Hermetically Sealed (3)
- Oil Filled, Hermetically Sealed, Thermal Overload Protection (5)
- Oil Filled, Hermetically Sealed, Thermally Protected and P… (1)
- Oil Filled, Hermetically Sealed, Thermally Protected and P… (1)
- Oil Filled, Thermally Protected (2)
- Oil Filled, Thermally Protected and Permanently Lubricated (1)
- Oil Filled, Thermally Protected, Permanent Split Capacitor (3)
- Oil-Filled, Permanent Split Capacitor (1)
- Oil-Filled, Permanently Lubricated, Permanent Split Capaci… (1)
- PSC, Oil-Filled, Thermal Overload Protection (1)
- Options
- Overall Dimensions
- 10 Inch Width x 13 Inch Height (1)
- 11-3/
4 Inch Width x 18-1/ 4 Inch Height (1) - 11.2 Inch Length x 7 Inch Width x 12.8 Inch Height (2)
- 11.2 Inch Length x 7 Inch Width x 16.4 Inch Height (1)
- 11.2 Inch Width x 16.4 Inch Height (6)
- 14 Inch Width x 13 Inch Height (1)
- 7.5 Inch Width x 5.5 Inch Depth x 10 Inch Height (1)
- 9 Inch Width x 7.7 Inch Depth (1)
- 9.5 Inch Length x 6.3 Inch Width x 13 Inch Height (7)
- 9.5 Inch Length x 6.4 Inch Width x 13.2 Inch Height (6)
- 9.5 Inch Width x 6.4 Inch Depth (1)
- 9.8 Inch Width x 9.6 Inch Height (1)
- 9.87 Inch Length (1)
- Power Cord Length
- Power Rating
- Shaft Material
- Shaft Seal Details
- Ceramic/
Carbon Unitized Seal (1) - Unitized Carbon Ceramic Mechanical Seal (1)
- Unitized Carbon/
Ceramic (2) - Unitized Carbon/
Ceramic Design with Buna-N Elastomer (1) - Unitized Carbon/
Ceramic Design with Buna-N Elastomer and S… (5) - Unitized Ceramic Carbon (4)
- Unitized Ceramic Carbon Mechanical Seal (3)
- Unitized Ceramic Carbon Seal (6)
- Unitized Ceramic/
Carbon Seal (7)
- Ceramic/
- Solid Size
- Speed Rating
- Temperature Rating
- 100 Deg F (Continuous Duty), 140 Deg F (Intermittent ) (5)
- 100 Deg F (Liquid), 266 Deg F (Stator), 248 Deg F (Thermal… (1)
- 104 Deg F (Liquid Continuous Duty), 266 Deg F (Stator), 24… (1)
- 140 Deg F (11)
- 140 Deg F (Fluid), 248 Deg F (Thermal Overload) (1)
- 140 Deg F (Liquid), 250 Deg F (Stator), 221 Deg F (Thermal… (1)
- 140 Deg F (Liquid), 266 Deg F (Stator), 105 Deg F (Thermal… (1)
- 140 Deg F (Liquid), 266 Deg F (Stator), 221 Deg F (Thermal… (5)
- 140 Deg F (Liquid), 266 Deg F (Stator), 248 Deg F (Thermal… (3)
- 200 Deg F (Liquid), 311 Deg F (Stator), 302 Deg F (Thermal… (2)
- Type
- 1-Piece, Uni-Body (5)
- Heavy Duty, Submersible (1)
- Mid Range (2)
- Submersible (4)
- Submersible, Automatic (5)
- Submersible, Automatic, Flange Mount (1)
- Submersible, Automatic, High Temperature (1)
- Submersible, Heavy Duty (1)
- Submersible, High Temperature (1)
- Submersible, Manual (3)
- Submersible, Mid-Range (5)
- Submersible, Mid-Range, Automatic (1)
- Submersible, Unique, 1-Piece (1)
- Warranty + Show All Refinements
Liberty Pumps
Page Loading...
Can't find what you are looking for?
Please fill out our non-stock/special order form and we'll get right back to you. Thanks!