Refine Results
- Brand
- Product Type
- Additional Information
- Back-Up Pump Rating 12 Volt DC 1000 Milliamp (1)
- Cord Type SJTW (1)
- Cord Type SJTW; Insulation Class B (3)
- Current Rating 12 Amp (Locked Rotor) (1)
- Current Rating 12.5 Amp (Locked Rotor) (1)
- Current Rating 16 Amp (Locked Rotor) (1)
- Current Rating 22.5 Amp (Locked Rotor) (2)
- Current Rating 23 Amp (Locked Rotor) (2)
- Current Rating 24 Amp (Locked Rotor) (2)
- Current Rating 24.1 Amp (Locked Rotor) (1)
- Current Rating 48.6 Amp (Locked Rotor) (1)
- Current Rating 8 Amp (Locked Rotor) (3)
- Enclosure Type IP68; Locked Rotor Current Rating 53 Amp; M… (1)
- Finish Epoxy Powder Coated (1)
- Insulation Class B (1)
- Kit Contains 16-1/
2 Inch x 15 Inch Poly Sump Pit, Poly Cov… (1) - Material Class 25 Cast Iron (Volute), Buna N (O-Ring), Sta… (1)
- Power Cord Length 25 Foot; Speed Rating 3450 RPM; Material… (1)
- Power Cord Type SJTW; Locked Rotor Current Rating 29.1 Amp… (1)
- Power Cord Type SJTW; Shut-Off Head Size 37 Foot (1)
- Size 13 Inch (Off Level), 25 Inch (On Level), 31 Inch (Ala… (1)
- Sump Diameter 10 Inch (1)
- Tank Capacity 41 Gallon; Insulation Class B (1)
- Thermal Overload Temperature 221 Deg F (1)
- Thermal Overload Temperature 275 Deg F (1)
- Turn-On Level 12 Inch; Turn-Off Level 3.5 Inch (1)
- Applicable Standard
- Application
- Commercial and Residential Sewage (3)
- Commercial, On-Site Waste Water System, Liquid Waste Trans… (1)
- Commercial, Residential, Light Commercial (2)
- Dewatering Pump (1)
- Home, Basement, Crawl Space Area (1)
- On Site Waste Water System, Liquid Waste Transfer, Commerc… (1)
- Residential (1)
- Residential and Commercial (2)
- Step System, LPP System, Mound System, Liquid Waste Transf… (1)
- Basin Dimensions
- Casing Material
- Collection
- Cutter Material
- Discharge Head
- Discharge Size
- End Connection
- Exclusions
- Float Type
- Adjustable Mechanical, Piggyback, Automatic (1)
- Adjustable, Mechanical (1)
- Adjustable, Wide Angle, Automatic (2)
- Automatic (2)
- Automatic, Adjustable, Wide Angle, Piggyback (1)
- Integral Vertical Magnetic (1)
- Mechanical (1)
- Piggyback (6)
- Piggyback Mechanical (1)
- Single Float Mechanical Level Control (1)
- Vertical Magnetic (2)
- Vertical Magnetic, Automatic (1)
- Wide Angle (4)
- Wide Angle Piggy Back (1)
- Flow Rate
- 0 to 45 GPM (1)
- 118 GPM (2)
- 125 GPM (1)
- 125 GPM at 5 Foot (3)
- 141 GPM at 5 Foot (1)
- 144 GPM (1)
- 144 GPM at 5 Foot (1)
- 160 GPM at 12 Foot (1)
- 37 GPM (1)
- 44 GPM (4)
- 50 GPM (2)
- 50 GPM at 10 Foot (4)
- 52 GPM (1)
- 58 GPM at 5 Foot (1)
- 62 GPM (3)
- 62 GPM at 5 Foot (1)
- 76 GPM (1)
- 78 GPM (2)
- 78 GPM at 5 Foot (1)
- 84 GPM (1)
- Housing Material
- Cast Iron (3)
- Class 25 Cast Iron (2)
- Class 25 Epoxy Powder Coated Cast Iron (2)
- Class 25 Powder Coat Painted Cast Iron (1)
- Deep Finned Powder Coated Aluminum, Polypropylene (1)
- Deep-Finned Powder Coated Aluminum (2)
- Epoxy Powder Coated Class 25 Cast Iron (5)
- Epoxy-Powder Coat Cast Iron (1)
- Polyethylene (1)
- Powder Coated Aluminum (1)
- Powder Coated Cast Iron (7)
- Powder Coated Class 25 Cast Iron (11)
- Impeller Design
- Impeller Material
- Inclusions Features
- Anti-Flotation Collar, Solid, Heavy Duty Fiberglass Cover (1)
- Buna-N O-Ring (1)
- Check Valve Included on Primary Pump and Back-Up Pump, 1-1… (1)
- Corrosion Resistant, Stainless Steel Removable Bottom Screen (1)
- Floats, Piping and Cover, Square Style 6-Pin Electrical Co… (1)
- Matching Duplex Control Panel (1)
- Non-Corrosive Stainless Steel Fastener (1)
- Peripheral Port Inlet, 300 Stainless Steel Intake Plate, V… (1)
- Peripheral Port Inlet, 300 Stainless Steel Intake Plate, V… (1)
- Permanently Lubricated Ball Bearing, Stainless Steel Faste… (1)
- Permanently Lubricated Ball Bearing, Stainless Steel Faste… (2)
- Permanently Lubricated Bearing (1)
- Permanently Lubricated Upper and Lower Ball Bearing, Buna-… (2)
- Permanently Lubricated Upper and Lower Bearing, Buna-N O-R… (1)
- Permanently Lubricated Upper and Lower Bearing, Removable … (1)
- Permanently Lubricated Upper and Lower Bearing, Removable … (1)
- QuickTree Technology, Integral Rubber Seal, Inspection Cov… (1)
- Stainless Steel Bottom Removable Screen, Stainless Steel F… (1)
- Stainless Steel Fastener (1)
- Stainless Steel Fastener, Quick Connect Power Cord, Ball B… (1)
- Stainless Steel Fastener, SJTW Power Cord (1)
- Unique 1-Piece Cast Body Eliminates Motor Housing Seal Rin… (1)
- Upper and Lower Ball Bearing, Buna-N O-Ring, Stainless Ste… (3)
- Upper and Lower Ball Bearing, Buna-N O-Ring, Stainless Ste… (1)
- Upper and Lower Ball Bearing, Buna-N O-Ring, Stainless Ste… (1)
- Upper and Lower Ball Bearing, Buna-N O-Ring, Stainless Ste… (1)
- Upper and Lower Ball Bearing, Buna-N O-Ring, Stainless Ste… (1)
- Upper and Lower Ball Bearing, Buna-N O-Ring, Stainless Ste… (1)
- Upper and Lower Ball Bearing, Quick Connect Power Cord, Fl… (1)
- Upper and Lower Ball Bearing, Quick Connect Power Cord, Fl… (1)
- Input Supply Rating
- 115 Volt (1)
- 115 Volt AC 5.2 Amp (1)
- 115 Volt AC 60 Hertz 1-Phase 10.4 Amp (2)
- 115 Volt AC 60 Hertz 1-Phase 10.5 Amp (1)
- 115 Volt AC 60 Hertz 1-Phase 12 Amp (9)
- 115 Volt AC 60 Hertz 1-Phase 5.2 Amp (3)
- 115 Volt AC 60 Hertz 1-Phase 7.3 Amp (1)
- 115 Volt AC 60 Hertz 1-Phase 8 Amp (2)
- 115 Volt AC 60 Hertz 10.4 Amp (1)
- 115 Volt AC 60 Hertz 5.2 Amp (4)
- 115 Volt AC 60 Hertz 6 Amp (2)
- 115 Volt AC 60 Hertz 6.5 Amp (1)
- 115 Volt AC 60 Hertz 7.5 Amp (1)
- 208 to 230 Volt AC 1-Phase 5.3/
13 Amp (1) - 208 to 230 Volt AC 60 Hertz 1-Phase 4 Amp (1)
- 208 to 230 Volt AC 60 Hertz 1-Phase 6.8 Amp (1)
- 208 to 230 Volt AC 60 Hertz 1-Phase 8 Amp (1)
- 208 to 230 Volt AC 60 Hertz 1-Phase 8.2 Amp (1)
- 208 to 230 Volt AC 60 Hertz 4 Amp (1)
- 208 to 230 Volt, 8 Amp, 1-Phase (1)
- 208/
230 Volt AC 1-Phase 60 Hertz 15 Amp (2) - 208/
230 Volt AC 60 Hertz 1-Phase (1) - 208/
230 Volt AC 60 Hertz 1-Phase 15 Amp (1) - 208/
230 Volt at 60 Hertz 1-Phase (1)
- Model No. (Corrected)
- Motor Type
- NEMA B Insulated Class B, Oil Filled, Permanent Split Capa… (1)
- NEMA B Insulated Class B, Oil Filled, Permanent Split Capa… (1)
- Oil Filled (6)
- Oil Filled Hermetically Seal (1)
- Oil Filled Permanent Split Capacitor, Thermally Protected … (1)
- Oil Filled, Class B Insulation and NEMA B Design (1)
- Oil Filled, Hermetically Sealed (2)
- Oil Filled, Hermetically Sealed, Thermal Overload Motor (1)
- Oil Filled, Hermetically Sealed, Thermally Protected and P… (1)
- Oil Filled, Thermally Protected (2)
- Oil Filled, Thermally Protected, Hermitically Sealed, Subm… (3)
- Oil Filled, Thermally Protected, Permanent Split Capacitor (3)
- Oil-Filled Motor with Thermal Overload Protection (1)
- Oil-Filled, Hermetically Sealed Motors with Thermal Overlo… (1)
- Oil-Filled, Hermetically Sealed, Thermal Overload Protection (6)
- Oil-Filled, Hermetically Sealed, Thermally Overload Protec… (1)
- Oil-Filled, Hermetically Sealed, Thermally Protected and P… (1)
- PSC, Oil-Filled, Thermal Overload Protection (1)
- Thermal Overload Protection, Hermetically Sealed, Oil Fill… (1)
- Thermally Protected, Permanent Split Capacitor (3)
- Options
- Overall Dimensions
- 10 Inch Width x 13 Inch Height (1)
- 10.9 Inch Length x 7.5 Inch Width x 11.4 Inch Height (2)
- 10.9 Inch Length x 7.5 Inch Width x 13.8 Inch Height (1)
- 11.2 Inch Length x 7 Inch Width x 12.8 Inch Height (2)
- 12.5 Inch Length x 9 Inch Width x 18.9 Inch Height (1)
- 12.5 Inch Width x 18.9 Inch Height (2)
- 12.5 Inch Width x 9 Inch Depth x 18.9 Inch Height (1)
- 14 Inch Height (3)
- 14 Inch Width x 13 Inch Height (1)
- 16-1/
2 Inch Width x 15 Inch Height (1) - 24 Inch Diameter x 24 Inch Height (1)
- 36 Inch x 48 Inch Basin (1)
- 9 Inch Width x 10 Inch Height (2)
- 9-1/
2 Inch Width x 19-1/ 2 Inch Height (2) - 9-3/
4 Inch Length x 9-3/ 4 Inch Width x 10.5 Inch Height (1) - 9-3/
5 Inch Width x 10-1/ 2 Inch Height (2) - 9.5 Inch Length x 6.3 Inch Width x 13 Inch Height (3)
- 9.5 Inch Length x 6.4 Inch Width x 13.2 Inch Height (3)
- 9.5 Inch Length x 6.5 Inch Width x 10.7 Inch Height (3)
- 9.6 Inch Length x 12.4 Inch Width (1)
- 9.6 Inch Width x 10.5 Inch Height (2)
- 9.6 Inch Width x 12.5 Inch Height (1)
- 9.8 Inch Width x 9.6 Inch Height (1)
- Power Cord Length
- Power Rating
- Shaft Material
- Shaft Seal Details
- Bi-Directional Dual Lip (1)
- Carbon/
Ceramic (4) - Carbon/
Ceramic, Unitized (1) - Engineered Double Lip Seal (4)
- Hermitically Seal (2)
- Unitized Ceramic Carbon (2)
- Unitized Ceramic Carbon Mechanical Seal (3)
- Unitized Ceramic Carbon Seal (1)
- Unitized Ceramic/
Carbon (3) - Unitized Ceramic/
Carbon Seal (7) - Unitized Silicon Carbide (3)
- Upper Radial and Lower Thrust Bearing (1)
- Solid Size
- Speed Rating
- Suction Size
- Temperature Rating
- 100 Deg F (Continuous Duty), 140 Deg F (Intermittent ) (5)
- 100 Deg F (Liquid), 266 Deg F (Stator), 248 Deg F (Thermal… (1)
- 104 Deg F (Continuous Duty), 140 Deg F (Intermittent), 266… (1)
- 104 Deg F (Continuous Duty), 140 Deg F (Intermittent), 266… (1)
- 104 Deg F (Liquid Continuous Duty), 266 Deg F (Stator), 24… (1)
- 104 Deg F (Liquid Continuous), 266 Deg F (Stator), 221 Deg… (2)
- 105 Deg C (Overload Temperature) (1)
- 130 Deg F (1)
- 135 Deg C (2)
- 135 Deg F (1)
- 140 DEG F (3)
- 140 DEG F LIQUID (2)
- 140 Deg F (37)
- 140 Deg F (Fluid) (6)
- 140 Deg F (Fluid), 221 Deg F (Thermal Overload) (2)
- 140 Deg F (Fluid), 221 Deg F (Thermal Overload), 105 Deg C… (1)
- 140 Deg F (Fluid), 248 Deg F (Thermal Overload) (1)
- 140 Deg F (Fluid), 266 Deg F (Stator), 221 Deg F (Thermal … (1)
- 140 Deg F (Intermittent), 104 Deg F (Continuous) (1)
- 140 Deg F (Liquid) (3)
- 140 Deg F (Liquid), 105 Deg C (Stator), 221 Deg F (Thermal… (3)
- 140 Deg F (Liquid), 221 Deg F (Stator), 221 Deg F (Thermal… (1)
- 140 Deg F (Liquid), 221 Deg F (Thermal Overload), 105 Deg … (1)
- 140 Deg F (Liquid), 221 Deg F (Thermal Overload/
Stator) (1) - 140 Deg F (Liquid), 250 Deg F (Stator), 221 Deg F (Thermal… (1)
- 140 Deg F (Liquid), 266 Deg F (Stator) (2)
- 140 Deg F (Liquid), 266 Deg F (Stator), 105 Deg F (Thermal… (2)
- 140 Deg F (Liquid), 266 Deg F (Stator), 221 Deg F (Thermal… (15)
- 140 Deg F (Liquid), 266 Deg F (Stator), 248 Deg F (Thermal… (4)
- 140 Deg F (Liquid), 275 Deg F (Stator), 275 Deg F (Thermal… (1)
- 140 Deg F Liquid (1)
- 150 Deg F (Fluid) (5)
- 160 Deg F (2)
- 180 Deg F (1)
- 180 Deg F (Continuous) (1)
- 200 Deg F (2)
- 200 Deg F (Liquid), 311 Deg F (Stator), 302 Deg F (Thermal… (2)
- 221 Deg F (Thermal Overload) (4)
- 221 Deg F (Thermal Overload)/
140 Deg F (Liquid)/ 266 Deg F … (1) - 248 Deg F (Thermal Overload) (1)
- 60 Deg C (Fluid), 105 Deg C (Thermal Overload) (1)
- Maximum 140 Deg F (Liquid), Maximum 266 Deg F (Stator), 24… (1)
- Type
- 1-Piece (2)
- 1-Piece, Submersible (1)
- 1-Piece, Uni-Body (7)
- Automatic (1)
- Core, Automatic (1)
- Heavy Duty, Submersible (1)
- Mid Range (2)
- Pre-Assembled Duplex (1)
- Simplex (1)
- Submersible (12)
- Submersible, Automatic (1)
- Submersible, Cool Running (1)
- Submersible, Heavy Duty (1)
- Submersible, Quick-Connect Cord, Automatic (1)
- Submersible, Unique, 1-Piece (2)
- Uni-Body, 1-Stage, 1-Piece (2)
- Warranty + Show All Refinements
Liberty Pumps
Page Loading...
Can't find what you are looking for?
Please fill out our non-stock/special order form and we'll get right back to you. Thanks!