Refine Results
- Brand
- Product Type
- Additional Information
- Finish Gray (1)
- Lead-Free; Flash Point 300 Deg F; Specific Gravity 1.32 (1)
- Lead-Free; Odor Mild; Specific Gravity 1.4; Boiling Point … (1)
- Lead-Free; Odor Slight; Specific Gravity 1.32; Flash Point… (1)
- Lead-Free; Odor Slight; Specific Gravity 1.32; Flash Point… (1)
- Lead-Free; Physical State Paste; Odor Mild; Flash Point 15… (1)
- Lead-Free; Physical State Paste; Odor Mild; Specific Gravi… (1)
- Lead-Free; Physical State Paste; Odor Mild; Specific Gravi… (1)
- Lead-Free; Physical State Paste; Odor Slight; Flash Point … (1)
- Odor Slight; Specific Gravity 1.32; Flash Point 300 Deg F;… (1)
- Service Factor 1.0; Thermal Overload Temperature 221 Deg F (1)
- Thermal Overload Temperature 105 Deg C (1)
- Turn-on level 8.25 Inch; Turn-off level 2.75 Inch (1)
- Applicable Standard
- ANSI/
NSF 61-G/ 372, ULC, CSA (US), UPC, FBC (1) - CSA (Canada and US) (3)
- CSA (Canada and US), SSPMA (2)
- CSA, SSPMA (1)
- NSF/
ANSI 61, UPC (1) - NSF/
ANSI 61G/ 372, CSA (US), UPC, FBC, ULC, Federal Specifi… (1) - NSF/
ANSI 61G/ 372, ULC, CSA (US), UPC, FBC, Federal Specifi… (2) - NSF/
ANSI 61G/ 372, ULC, CSA (US), UPC, FBC, Federal Specifi… (1) - UL, CSA (US), ULC, UPC, NSF/
ANSI 61G/ 372, FBC (1) - UL, ULC, NSF/
ANSI 61G/ 372, CSA (US), UPC (1) - UPC, CSA (US), IAPMO (1)
- ANSI/
- Application
- Galvanized Steel, Iron, Brass, Copper, Aluminum, Stainless… (1)
- Iron, Galvanized Steel, Stainless Steel, Brass, Copper, Al… (1)
- Iron, Galvanized Steel, Stainless Steel, Brass, Copper, Al… (1)
- Iron, Galvanized Steel, Stainless Steel, Brass, Copper, Al… (1)
- Iron, Galvanized Steel, Stainless Steel, Brass, Copper, Al… (1)
- Metal and Plastic Pipe, Iron, Galvanized Steel, Stainless … (1)
- Metal and Plastic Piping, Iron, Galvanized Steel, Stainles… (1)
- Metal and Plastic Piping, Iron, Galvanized Steel, Stainles… (2)
- Residential and Commercial (1)
- Sewage System (1)
- Basin Capacity
- Basin Dimensions
- Casing Material
- Collection
- Container Capacity
- Container Type
- Discharge Head
- Discharge Size
- End Connection
- Float Type
- Flow Rate
- Housing Material
- Impeller Design
- Impeller Material
- Inclusions Features
- Dual Ball Bearing, Cast Iron Motor Plate, High Suction Por… (1)
- Integral Rubber Seal, Unique Cord Seal Technology, Integra… (2)
- Oil Filled, Thermally Protected Motor, Permanently Lubrica… (1)
- Permanently Lubricated Upper and Lower Ball Bearing, Stain… (1)
- Separate Access Cover, Schedule 80 PVC Piping, Float, Rubb… (1)
- Input Supply Rating
- Material
- Model No. (Corrected)
- Motor Type
- Overall Dimensions
- Power Cord Length
- Power Rating
- Pressure Rating
- Shaft Material
- Shaft Seal Details
- Solid Size
- Speed Rating
- Suction Size
- Temperature Rating
- -10 to 140 Deg F (15)
- -10 to 220 Deg F (6)
- -15 to 110 Deg F (19)
- -20 TO 180 DEG F (710)
- -20 to 100 Deg F (5)
- -20 to 170 Deg F (4)
- -20 to 170 Deg F, 210 Deg F (Intermittent) (5)
- -20 to 180 Deg F (37)
- -200 to 550 Deg F (4)
- -30 TO 230 DEG F (11)
- -40 TO 150 DEG F (31)
- -40 TO 230 DEG F (519)
- -40 to 110 Deg F (4)
- -40 to 125 Deg F (9)
- -40 to 140 Deg F (5)
- -40 to 175 Deg F (13)
- -40 to 180 Deg F (14)
- -40 to 230 Deg F (76)
- -40 to 250 Deg F (67)
- -400 to 500 Deg F (5)
- -450 to 500 Deg F (19)
- -50 to 400 Deg F (13)
- 0 to 150 Deg F (8)
- 0 to 160 Deg F (11)
- 0 to 175 Deg F (11)
- 0 to 200 Deg F (6)
- 0 to 250 Deg F (36)
- 0 to 350 Deg F (11)
- 0 to 400 Deg F (27)
- 100 Deg F (18)
- 100 Deg F (Continuous Duty), 140 Deg F (Intermittent ) (5)
- 104 Deg F (16)
- 110 to 33 Deg F (7)
- 113 Deg F (20)
- 130 Deg F (42)
- 14 to 284 Deg F (6)
- 140 DEG F (5)
- 140 Deg F (167)
- 140 Deg F (Fluid) (6)
- 140 Deg F (Liquid), 266 Deg F (Stator), 221 Deg F (Thermal… (15)
- 140 Deg F (Operating), 33 to 140 Deg F (Ambient) (8)
- 150 DEG F (6)
- 150 Deg F (Fluid) (5)
- 160 Deg F (83)
- 180 Deg F (101)
- 194 Deg F (15)
- 194 Deg F at 43.8 PSI (9)
- 200 DEG F (14)
- 200 Deg F (33)
- 210 Deg F (35)
- 212 Deg F (27)
- 212 Deg F, 70 to 120 Deg F (Operating) (10)
- 225 Deg F (28)
- 225 Deg F (Continuous), 250 Deg F (intermittent ) (33)
- 225 Deg F (Standard Seal), 250 Deg F (Special Seal) (6)
- 230 Deg F (18)
- 240 Deg F (10)
- 250 DEG F (5)
- 250 Deg F (96)
- 260 Deg F at 150 PSI (12)
- 267 Deg F (5)
- 300 Deg F (64)
- 32 to 120 Deg F (11)
- 32 to 210 Deg F (5)
- 320 Deg F (26)
- 33 to 110 Deg F (7)
- 33 to 140 Deg F (16)
- 33 to 160 Deg F (12)
- 33 to 180 Deg F (57)
- 33 to 250 Deg F (8)
- 350 Deg F (18)
- 353 Deg F (22)
- 353 Degree F (9)
- 366 Deg F (36)
- 366 Degree F (30)
- 37 to 102 Deg F (7)
- 391 Deg F (6)
- 40 to 100 Deg F (12)
- 40 to 140 Deg F (40)
- 40 to 150 Deg F (45)
- 40 to 160 Deg F (9)
- 40 to 180 Deg F (5)
- 40 to 200 Deg F (Fluid) (10)
- 40 to 225 Deg F (7)
- 40 to 230 Deg F (14)
- 40 to 230 Deg F (Fluid) (7)
- 400 Deg F (109)
- 406 Deg F (5)
- 406 Degree F (12)
- 421 Deg F (10)
- 421 Degree F (8)
- 450 Deg F (24)
- 50 to 200 Deg F (Fluid) (8)
- 50 to 200 Deg F (Fluid), 125 Deg F (Ambient) (5)
- 70 to 145 Deg F (5)
- 80 to 120 Deg F (19)
- 90 to 160 Deg F (20)
- 90 to 180 Deg F (5)
- 95 to 125 Deg F (8)
- MAXIMUM 230 DEG F (15)
- Type
- Duplex, Pre-Assembled (1)
- Fast Drying, PTFE (1)
- Low Temperature, Low Odor, Paste (1)
- Non-Hardening, PTFE with Synthetic Fiber (1)
- PTFE, Synthetic Fiber, Non-Hardening (1)
- PTFE, Synthetic Fiber, Paste (2)
- Premium, Multi-Purpose, Non-Hardening, Slow Drying (1)
- Submersible (1)
- Submersible, Automatic (1)
- Submersible, Automatic, Integrally Wired, Heavy-Duty (1)
- Vent Connection
- Warranty + Show All Refinements
All Products
Page Loading...
Can't find what you are looking for?
Please fill out our non-stock/special order form and we'll get right back to you. Thanks!