Refine Results
- Brand
- Product Type
- Bathroom Sink Vanity (1)
- Bathroom Vanity (6)
- Cable Tie (1)
- Copper Tube (1)
- Deluxe Slidebar (2)
- Faucet Hose (1)
- Faucet Hose Connector (1)
- Gas Connector (1)
- Gas Vent Pipe (1)
- Grab Bar (38)
- Kitchen Sink (1)
- Laundry Sink (1)
- Lavatory Sink Supply Tube (1)
- Mop Service Basin Wall Guard (1)
- Safety Grab Bar (1)
- Shower Base (2)
- Shower Floor (9)
- Shower Floor Drain (4)
- Shower Receptor (3)
- Shower Wall (2)
- Slide Bar (1)
- Straight Edge (1)
- Thermocouple (2)
- Vanity (3)
- Wash Sink (1)
- Additional Information
- 12 Inch Height; Includes Corner Bracket (1)
- Allowable Minimum Clearance to Combustible is 1 Inch; Over… (1)
- Applicable Standard ADA, ASME A112.18.1/
CSA B125.1, ICC/ AN… (1) - Application Commercial, Industrial, Business (2)
- Bar Size 7/
8" x 1-1/ 4"; Depth 2-3/ 4"; Flange Size 3" Lengt… (1) - Cabinet Size 39" (1)
- Capacity 15 Gallon (1)
- Capacity 500 Pound (2)
- DEPTH 2.75"; WEIGHT CAPACITY 500 LB; FLANGE DIAMETER 3.15"… (1)
- Depth 2-3/
4 Inch; Backplate Diameter 3-1/ 2 Inch; Wall Clea… (1) - Depth 2-3/
4 Inch; Flange Diameter 3-1/ 2 Inch; Wall Clearan… (1) - Depth 2-3/
4 Inch; Post Size 3 Inch; Wall Clearance 1-1/ 2 I… (1) - Depth 2.75 Inch (1)
- Depth 2.75 Inch; Flange Diameter 3.25 Inch; Weight Capacit… (1)
- Depth 2.75 Inch; Flange Size 3.25 Inch Diameter; Weight Ca… (1)
- Depth 2.925 Inch; Flange Size 2.95 Inch Diameter; Weight C… (1)
- Depth 2.94 Inch; Height 2.96 Inch Square; Weight Capacity … (1)
- Depth 2.95 Inch; Backplate Diameter 3.25 Inch; Weight Capa… (2)
- Depth 3 Inch; Flange Size 3 Inch Diameter (2)
- Depth 3 Inch; Flange Size 3 Inch Diameter; Wall Clearance … (1)
- Depth 3 Inch; Flange Size 3.175 Inch Diameter; Weight Capa… (1)
- Depth 3"; Flange Diameter 3"; Wall Clearance 1-1/
2"; Packa… (2) - Depth 3"; Weight Capacity 500 Lb; Flange Diameter 3.5"; Pa… (1)
- Depth 3-3/
8 Inch; Backplate Diameter 3 Inch; Wall Clearanc… (2) - Depth 3-3/
8"; Flange Diameter 3"; Wall Clearance 1-1/ 2"; P… (1) - Depth 3.06"; Weight Capacity 500 Lb; Flange Diameter 3.14"… (1)
- Drain Location Center; Threshold 4-1/
2 Inch (1) - Drain Location Center; Used with Durawall Shower Wall (4)
- Flange Diameter 2-13/
16"; Width 2-3/ 4"; Warranty Lifetime … (1) - Flange Diameter 3.175 Inch; Depth 3 Inch; Capacity 500 Pound (1)
- Flange Size 3 Inch Diameter; Wall Clearance 1-1/
2 Inch (1) - Flange Size 3.14 Inch Diameter (1)
- Floor Load Capacity 20 Pound per Square Foot (3)
- Gas Type Natural/
Propane; Capacity 515900 BTU/ Hour; Applic… (1) - Installation Type Direct-to-Stud (2)
- Lead-Free; Flow Rate 6.64 GPM at 60 PSI; Pressure Rating 2… (1)
- Lead-Free; Packaging Type Bulk (1)
- Mounting Type Wall (1)
- Mounting Type Wall Mount; Applicable Standard ADA, ASME A1… (2)
- Packaging Type Bulk (1)
- Recommended Accessory 2798, 2781, K-5457/
K-5423/ K-5438 Bat… (1) - Size 3-1/
2" Width; Warranty Lifetime Limited (2) - Temperature Rating 185 Deg F; Melting Point 400 Deg F; Pac… (1)
- Thread Series UN (1)
- Threshold Height 4-1/
2 Inch; Drain Location Center (1) - Used with Durawall Shower Wall (1)
- Voltage Rating 30 Millivolt; Open Circuit Output 26 to 32 … (2)
- Water Depth 7 Inch; Drain Hole Size 2-1/
8 Inch; Faucet Hol… (1) - Weight Capacity 300 Lb; Warranty Lifetime Limited (1)
- Weight Capacity 500 Lb; Warranty Lifetime Limited (2)
- Width 1-1/
8 Inch (1)
- Applicable Standard
- ADA (6)
- ADA, ANSI, ASTM, CSA (1)
- ADA, ANSI, CSA (3)
- ADA, ANSI, CSA, ASTM (1)
- ADA, ASTM F446, ICC/
ANSI A117.1 (1) - ADA, ASTM, CSA, ANSI (4)
- ADA, CSA, ASTM, ANSI (1)
- ADA, ICC/
ANSI A117.1 (15) - ADA, UL (Canada and US) (1)
- ADA, UL (Canada and US), CSA, ANSI, ASTM (1)
- ANSI A117.1, HUD, FHA, VA, ADA (1)
- ANSI Z124, ASTM D635, E84/
162 (2) - ANSI Z124, CUPC, Intertek, ELM, IAPMO (1)
- ASME A112.18.1, CSA B125.1, NSF/
ANSI 61/ 372 (1) - ASME A112.18.1/
CSA B125.1, NSF 61/ 9/ 372, CSA (Canada and US) (1) - ASME A112.19.1/
CSA B45.2 (1) - ASTM E162/
E662, ASME A112.19.1/ CSA B45.2, CSA B45.5/ IAPMO … (3) - ASTM E162/
E662, CSA B45.5/ IAPMO Z124, UL 2818 (5) - ASTM E162/
E662, HUD, UM73, CSA B45.5/ IAPMO Z124 (1) - ASTM F446 (2)
- ASTM F446, CSA B45/
B651, ANSI A117.1 (1) - CARB P2 (4)
- CARB P2, EPA TSCA Title VI (6)
- CSA (1)
- CSA, ANSI Z 124, ASTM D.635/
E84/ E162, IAPMO, CAN/ ULC S102-07 (1) - CSA, ANSI Z124, ASTM D635 E84/
162, CAN/ ULC S102, IAPMO (1) - CSA, ANSI Z124, ASTM D635 E84/
162, CAN/ ULC S102, IAPMO, UP… (4) - CSA, ANSI Z124, ASTM E84, CAN/
ULC S102, IAPMO (1) - HUD, UM Bulletin 73, CSA B45.5/
IAPMO Z124, UL 2818 (1) - UL (Canada and US), ADA, ANSI A117.1, ASTM F446, CSA B45/
B… (1) - UL 441 (1)
- UPC, CSA, ANSI Z 124, ASTM D.635/
E84/ E162, IAPMO, CAN/ ULC … (1)
- Application
- Bathroom (12)
- Bathroom Sink (2)
- Bathroom, Choreograph Wall Panel (2)
- Bathroom, Commercial (2)
- Bathroom, Kitchen (1)
- Commercial, Residential (1)
- Home Shower (1)
- Industrial, Commercial (2)
- Industrial, Commercial, Business (12)
- Pilot Burner, Standing Pilot Gas Fired Heating System, Saf… (2)
- Plumbing (2)
- Approval
- Bowl Dimensions
- Cabinet Material
- Collection
- 90 Degree[TM] (1)
- Align[R] (1)
- Align[TM], SecureMount[TM] (1)
- Angular Modern[R], Decor Assist[TM] (1)
- Archer[R] (2)
- Arris[R] (1)
- Awaken[TM] (1)
- Brockway[TM] (1)
- CareGiver[R] (1)
- Choreograph[R] (2)
- DURABASE[R] (8)
- DURAGUARD[TM] (1)
- DURAWALL[R] (2)
- Damask[R] (1)
- Ensemble[TM] (1)
- Home Care[R] (6)
- Iso[TM] (1)
- Jute[TM] (3)
- Kingsley[R] (1)
- Kingsley[R], SecureMount[TM], Home Care[R] (1)
- Lancaster[TM] (1)
- Poplin[R] (3)
- Rely[R] (1)
- SUPR-SAFE[R] (1)
- SecureMount[TM] (1)
- SecureMount[TM], Home Care[R] (5)
- Traditional, Decor Assist[TM] (3)
- Transitional (2)
- UTILATWIN[R] (1)
- Connection Type
- Cutout Dimensions
- Depth
- Diameter
- Drain Connection
- End Connection
- End Type
- Exclusions
- Anchor (3)
- Door and Drawer Pull, Adjustable Shelf/
Drawer (1) - Overflow (1)
- Vanity Top (3)
- Vanity Top, Door and Drawer Pulls, Adjustable Shelf, Drawe… (1)
- Vanity Top, Door and Drawer Pulls, Adjustable Shelf, Rollo… (1)
- Vanity Top, Door and Drawer Pulls, Drawer Organizer (1)
- Vanity Top, Medicine Cabinet Frame/
Surround, Poplin/ Marabo… (1) - Vanity Top, Medicine Cabinet Side Kit, Jute Bar Pull (2)
- Faucet Hole Center
- Flange Material
- Flange Mounting Type
- Grab Bar Material
- Height
- Inclusion Features
- Inclusions Features
- (2) Washer (1)
- (3) Large Molded-In Self-Draining Shelf, Center Panel with… (2)
- (3) Set Screw, Washer (1)
- 110 Degree Opening 3-Way Adjustable Slow Close Door Hinge (1)
- 110 Degree Opening 3-Way Adjustable Slow Close Door Hinge,… (2)
- 3-Way Adjustable Slow Close Door Hinge, Slow Close Full Ex… (2)
- 3-Way Adjustable Slow Close Door Hinge, Slow Close Undermo… (2)
- 3-Way Adjustable Slow Close Door Hinge, Slow Close Undermo… (1)
- 3-Way Adjustable Slow Close Door Hinge, Slow Close Undermo… (1)
- Acid and Alkali Resistant Glazed Surface, Offset Drain Ope… (1)
- Adjustable Mounting Bracket (1)
- Adjustable Mounting Bracket, Integrated Water Supply (1)
- Center Drain, 3 Inch Threshold (1)
- Center Drain, Molded-In Textured Floor (5)
- Center Drain, Removable Cover (3)
- Center Integral Molded Drain and Seal, Removable Strainer (1)
- Concealed Screw, 2 Inch Screw, Corrosion Resistant (1)
- Concealed Screw, 2 Inch Screw, Corrosion Resistant, Secure… (1)
- Concealed Screw, 2-1/
4 Inch Screw, Corrosion Resistant (1) - Concealed Screw, Corrosion Resistant (2)
- Concealed Screw, Corrosion Resistant, Securemount Design (1)
- Corrosion Resistant (3)
- Corrosion Resistant, Concealed Screw (1)
- Exposed Screw (2)
- Frameless Construction, Durable Moisture-Resistant Finish (1)
- Hanger (1)
- Installation Hardware, Bracket, Screw, End Cap, Plug (2)
- Installation Instructions with Cap and Support (1)
- Integral Molded Drain, Semi-Gloss Surface (1)
- Integral Molded Drain, Semi-Gloss Surface, Center Drain (1)
- Integrated Water Supply, Adjustable Mounting Bracket (1)
- Mounting Flange (1)
- Mounting Hardware, 20 Gauge Snap Lock Cover (1)
- Mounting Hardware, Mounting Template (2)
- Mounting Hardware, Mounting Template, Wall Anchor (12)
- Mounting Screw (3)
- Nylon Ferrule (1)
- Nylon Insert (1)
- Securemount Design, Corrosion Resistant (1)
- Slip Resistant, Tile Flange, Integral Molded Drain and Sea… (5)
- Tools, Installation Hardware, Installation Template, Corro… (1)
- Waste Connector, Washer and Slip Nut, 6 Inch Swing Spout F… (1)
- Installation Type
- Length
- 1-1/
2" (37) - 10 Inch (23)
- 10" (46)
- 10' (97)
- 100' (105)
- 1000' (22)
- 102 In (25)
- 108 In (27)
- 11" (37)
- 12 In (56)
- 12 Inch (163)
- 12" (52)
- 13 In (47)
- 14 Inch (31)
- 14-3/
16 Inch (50) - 15 In (168)
- 15 Inch (41)
- 16 Inch (65)
- 17 In (243)
- 18 3/
8 In (40) - 18 In (309)
- 18 Inch (298)
- 18" (39)
- 18-3/
8 In (25) - 19 1/
2 In (78) - 19 INCH (27)
- 19 In (190)
- 19 Inch (21)
- 19-1/
2 In (86) - 19-1/
4 Inch (30) - 19-3/
4 In (21) - 2" (58)
- 2-1/
2" (65) - 20 Inch (71)
- 20' (165)
- 20-3/
4 Inch (27) - 21' (47)
- 22 In (461)
- 24 INCH (51)
- 24 Inch (405)
- 24" (38)
- 25 In (657)
- 25 Inch (71)
- 27 Inch (30)
- 28 In (38)
- 29 In (141)
- 3" (78)
- 3' (47)
- 3-1/
2" (69) - 30 Inch (98)
- 30" (31)
- 300' (54)
- 31 In (162)
- 32 Inch (24)
- 33 In (726)
- 33 Inch (112)
- 36 1/
8 In (38) - 36 3/
4 In (30) - 36 Inch (86)
- 36" (40)
- 36-3/
4 In (40) - 37 1/
4 In (24) - 37 In (46)
- 37-1/
4 In (24) - 38 1/
2 In (22) - 39 In (25)
- 4" (99)
- 4-1/
2" (72) - 42 Inch (52)
- 43 In (88)
- 48 In (46)
- 48 Inch (74)
- 48" (36)
- 5" (89)
- 5' (24)
- 5-1/
2" (72) - 500' (25)
- 54 In (30)
- 55 1/
2 In (36) - 57 In (27)
- 6 Inch (88)
- 6" (87)
- 6' (33)
- 60 INCH (24)
- 60 Inch (293)
- 61 1/
2 In (46) - 63 In (31)
- 66 Inch (75)
- 7 Inch (31)
- 7" (50)
- 70 1/
2 In (28) - 72 Inch (94)
- 79 1/
2 In (48) - 8 Inch (90)
- 8" (57)
- 9 Inch (28)
- 9" (39)
- 97 1/
2 In (28) - Close (82)
- Run (43)
- 1-1/
- Material
- 20 Gauge 304 Stainless Steel (1)
- Acid Resistant Enameled Cast Iron (1)
- Acrylic (8)
- Aluminum (1)
- Aluminum (Inner Wall), G90 Galvanized Steel (Outer Wall) (1)
- Copper (1)
- Fireclay (1)
- Metal (3)
- Molded Fiberglass (8)
- Nylon 66 (1)
- PEX (1)
- Reinforced Molded Fiberglass (2)
- Solid Vikrell (2)
- Stainless Steel (1)
- Thermoplastic (Tub), Steel (Leg) (1)
- Material Thickness
- Model No. (Corrected)
- 013E (1)
- 280 (1)
- 285 (1)
- 390 (1)
- 401 (1)
- 41636 (4)
- 417 (1)
- 41736 (2)
- 41836 (1)
- 419 (1)
- 41936 (2)
- 50 (1)
- 554 (1)
- 8700 (3)
- 8900 (1)
- K-10544 (1)
- K-3200 (1)
- K-9396 (2)
- K-97626 (2)
- K-98344 (1)
- K-99520-LGR (1)
- K-99533-LGR (3)
- K-99543-R (3)
- LR8900P (1)
- Model 8900 (1)
- Model YG0436 (1)
- Model YG0736 (1)
- Model YG5400 (1)
- Q340 (1)
- Q390 (1)
- R8700D3G (2)
- R8700P (1)
- R8736D3G (1)
- R8900P (1)
- RC3618 (1)
- RP (1)
- Series 17 (1)
- Series 41636 (1)
- YG0436 (1)
- YG0836 (1)
- YG5400 (1)
- YG8836 (1)
- Mounting Type
- No. Of Doors Drawers
- No. Of Holes
- Nominal Size
- Rough In
- 12 Inch (1)
- 12 Inch Length x 12 Inch Width (2)
- 18 Inch Length x 15-7/
8 Inch Width (1) - 18 Inch Length x 16-1/
4 Inch Width (3) - 18 Inch Length x 18 Inch Width (3)
- 18 Inch Length x 18-13/
16 Inch Width (3) - 18 Inch Length x 20-1/
4 Inch Width (2) - 18 Inch x 15-13/
16 Inch (1) - 18 Inch x 18 Inch (1)
- 21 Inch x 18 Inch (1)
- 7 Inch Right/
Left Hand (1) - 9 Inch (1)
- Shape
- Size
- Temperature Measuring Range
- Temperature Rating
- Top Material
- Trap Standard Supplied
- Type
- 1-Bowl (1)
- 1-Piece (2)
- 1-Piece, Double Threshold, Square (1)
- 1-Piece, Neo-Angle, Single Threshold (1)
- 1-Piece, Single Threshold, Neo-Angle (2)
- 1-Piece, Single Threshold, Rectangle (1)
- 1-Piece, Single Threshold, Square (2)
- 1-Piece, Square, Single Threshold (1)
- 100 Degree Opening, Cabinet, Standard, Single Basin (3)
- 110 Degree Opening, Frameless, Cabinet, Single Basin, Wall… (2)
- 110 Degree Opening, Frameless, Cabinet, Standard, Single B… (1)
- 3-Piece, Square, Alcove (2)
- Adjustable, Deluxe (1)
- Angular (1)
- Cabinet, Single Basin (3)
- Cabinet, Single Bowl, Standard (1)
- Decorative (6)
- Deluxe (2)
- Designer (2)
- Double Bowl (1)
- Flexible (2)
- Rectangle (1)
- Single Bowl (1)
- Single Threshold, Rectangle (5)
- Single Threshold, Square (3)
- Standard, 1-Piece (1)
- Straight (14)
- Straight Edge, Heavy Duty (1)
- Straight, Curl Grip (1)
- Straight, Curl Grip, Designer (1)
- Straight, Decorative (3)
- Straight, Decorative, Rectangular Bar (1)
- Straight, Decorative, Round (2)
- Straight, Round (1)
- Straight, Traditional Decorative (1)
- Threshold (1)
- Type B Gas Vent, Double Wall, Round (1)
- Uncoated (1)
- Universal (1)
- Used On Item
- Used On Model Brand
- Width + Show All Refinements
All Products 36 Inch
All Products
Page Loading...
Can't find what you are looking for?
Please fill out our non-stock/special order form and we'll get right back to you. Thanks!