Refine Results
- Brand
- Product Type
- Additional Information
- AUTOMATIC PRESET; WEIGHT 87 TO 90 LB (1)
- Cord Type SOW/
SOOW Multi-Wire Neoprene (1) - Current Rating 8 Amp (Locked Rotor) (1)
- Enclosure Type NEMA 1 (1)
- Finish Epoxy Powder Coated; Sump Diameter 10 Inch; Current… (1)
- Finish Powder Coated; Locked Rotor Current Rating 16 Amp; … (1)
- Motor Insulation Class B; Auto On/
Off Point 15-3/ 4 Inch or… (1) - Motor Protection Auto Reset Thermal Overload; Cord Type 3-… (1)
- Motor Protection Thermal Sensor; Cord Type Sensor Cord; Di… (1)
- SPEED RATING 3450 RPM; POWER CORD LENGTH 15', CORD TYPE UL… (1)
- Switch Type Manual (1)
- WEIGHT 29 LB; SUMP DIAMETER 14 INCH; WITH QUICK DISCONNECT (1)
- Applicable Standard
- ASME A17.1, UL, CSA (Canada and US) (1)
- ASME A17.1, UL/
CSA (Canada and US), SSPMA (1) - CSA (CANADA AND US), SSPMA (1)
- CSA (Canada and US), ISO 9001, SSPMA (1)
- CSA (Canada and US), SSPMA (3)
- CSA (Canada and US), SSPMA, ISO 9001 (1)
- UL 778, CSA (Canada and US), CSA C22.2 108, SSPMA (1)
- UL 778, CSA (Canada and US), CSA C22.2 108, SWPA (1)
- UL 778, CSA (Canada and US), SSPMA, CSA C22.2 (1)
- UL, CSA (1)
- UL, CSA (Canada and US) (1)
- UL, CSA (Canada and US), SSPMA, ISO 9001 (1)
- Application
- Commercial (1)
- Commercial, On-Site Waste Water System, Liquid Waste Trans… (1)
- DEWATERING (1)
- Dewatering Pump (1)
- Dewatering, Effluent System, Septic Tank, Enhanced Flow St… (1)
- Elevator Sumps, Transformer Vaults, Manufacturing Faciliti… (1)
- Elevator, Garage (1)
- Residential Dewatering (Sump) System (1)
- Residential Wastewater, Light Commercial, 2 Inch Sewage Ej… (1)
- Residential, Light Commercial Sewage Grinder (1)
- Tankless Water Heating Unit (1)
- WASTE WATER SYSTEM, LIQUID WASTE TRANSFER, COMMERCIAL SUMP (1)
- Casing Material
- Collection
- Discharge Head
- Discharge Size
- End Connection
- Float Type
- Flow Rate
- Housing Material
- Aluminum (1)
- Cast Iron (3)
- Class 25 Cast Iron (2)
- Deep Finned Powder Coated Aluminum, Polypropylene (1)
- EPOXY COATED CLASS 25 CAST IRON (1)
- Engineered Plastic (1)
- Engineered Plastic (Pump) (1)
- Epoxy Powder Coated Class 25 Cast Iron (1)
- POWDER COATED EPOXY FINISHED CAST IRON (1)
- Powder Coated Epoxy Cast Iron (2)
- Stainless Steel (1)
- Impeller Design
- Impeller Material
- Inclusions Features
- Balanced Ductile Iron Impeller, Stainless Steel (Screw/
Bol… (1) - CORROSION RESISTANT STAINLESS STEEL FASTENER, STAINLESS ST… (1)
- Capacitor Start, Cast Iron Adapter, Upper and Lower Ball B… (1)
- Cast Iron Upper Sleeve and Lower Ball Bearing, Stainless S… (1)
- Control, Remote Alarm, Easy Clamp Mount Installation, Plug… (1)
- Fastener, Permanently Lubricated Ball Bearing (1)
- High Water Indoor Alarm, 1-1/
4 Inch Silent Check Valve, St… (1) - Non-Automatic Operation, High Head, Neoprene Gasket and Se… (1)
- Non-Corrosive Stainless Steel Fastener (1)
- Piggyback Electrical Supply Cord, 20 Amp Internal Relay, A… (1)
- Stainless Steel Bottom Removable Screen, Stainless Steel F… (1)
- Stainless Steel Braided Flush Line, Stainless Steel Handle… (1)
- Stainless Steel Fastener (1)
- Upper and Lower Ball Bearing, Buna-N O-Ring, Stainless Ste… (1)
- Balanced Ductile Iron Impeller, Stainless Steel (Screw/
- Input Supply Rating
- 115 V AT 60 HZ 1 PHASE 8.5 AMPERE (1)
- 115 Volt 1 Phase at 60 Hertz 7 Amp (1)
- 115 Volt AC 60 Hertz 1-Phase 10.5 Amp (1)
- 115 Volt AC 60 Hertz 1-Phase 15 Amp (1)
- 115 Volt AC 60 Hertz 1-Phase 3 Amp (1)
- 115 Volt AC 60 Hertz 1-Phase 5.2 Amp (1)
- 115 Volt AC 60 Hertz 1-Phase 7.3 Amp (1)
- 115 Volt AC 60 Hertz 1-Phase 8 Amp (Full Load)/
23 Amp (Loc… (1) - 115 Volt AC 60 Hertz 1-Phase 8/
23 Amp (1) - 115 Volt AC 60 Hertz 5.2 Amp (1)
- 115 Volt AC 8.5 Amp (1)
- 208 Volt AC 3-Phase (1)
- 208 to 230 Volt AC 60 Hertz 1-Phase 6.5 Amp (1)
- 230 V 1 PHASE 17.1 AMPERE (1)
- 230 Volt AC 1-Phase 13.7 Amp (1)
- Model No. (Corrected)
- Motor Type
- Air Cooled, Oil-Free (1)
- Class B Insulation Oil Filled Hermetically Sealed Permanen… (1)
- Class B Insulation Oil Filled Hermetically Sealed Start/
Ru… (1) - Class B Insulation, Oil Filled Permanent Split Capacitor, … (1)
- Hermetically Sealed (1)
- OIL FILLED (1)
- OIL FILLED, THERMALLY PROTECTED (1)
- Oil Filled, Capacitor Start, Class B Insulated, NEMA B Des… (1)
- Oil Filled, Hermetically Sealed, Automatic Reset Thermal O… (1)
- Oil Filled, Hermetically Sealed, Automatic Reset Thermal O… (1)
- Oil Filled, Hermetically Sealed, Thermal Overload Protection (1)
- Oil Filled, Hermetically Sealed, Thermally Protected and P… (1)
- Thermal Overload Protection, Hermetically Sealed, Oil Fill… (1)
- Thermally Protected (1)
- Thermally Protected, Permanent Split Capacitor (1)
- Options
- Overall Dimensions
- 10 Inch Length x 7-7/
8 Inch Width x 12-1/ 8 Inch Height (1) - 11-21/
32 Inch Length x 8-1/ 8 Inch Width x 24-7/ 32 Inch Hei… (1) - 11.2 Inch Width x 16.4 Inch Height (1)
- 12-3/
4 Inch Length x 10-11/ 32 Inch Width x 19-5/ 16 Inch He… (1) - 12-7/
8 INCH L X 10-15/ 32 INCH W X 18-9/ 16 INCH H (1) - 26-1/
2 Inch Width x 25-1/ 2 Inch Height (1) - 7.5 Inch Width x 5.5 Inch Depth x 10 Inch Height (1)
- 8 Inch Length x 11-5/
8 Inch Width x 18-5/ 8 Inch Height (1) - 8.4 Inch Length x 3.875 Inch Width x 12-1/
8 Inch Height (1) - 9.5 INCH W X 13 INCH H (1)
- 9.5 Inch Length x 6.4 Inch Width x 13.2 Inch Height (1)
- 9.5 Inch Length x 6.5 Inch Width x 10.7 Inch Height (1)
- 9.6 Inch Width x 10.5 Inch Height (1)
- 9.6 Inch Width x 12.4 Inch Height (1)
- 10 Inch Length x 7-7/
- Power Cord Length
- Power Rating
- Shaft Material
- Shaft Seal Details
- Carbon Ceramic Seal, Single Seal (1)
- Carbon and Ceramic Mechanical Seal (3)
- Carbon/
Ceramic Mechanical Seal (2) - Ceramic/
Carbon (1) - Engineered Double Lip Seal (1)
- Engineered Double Lip Seal with Stainless Steel Spring (1)
- STAINLESS STEEL CARBON/
CERAMIC ROTARY, SINGLE SEAL (1) - UNITIZED CERAMIC CARBON (1)
- Unitized Carbon/
Ceramic Design with Buna-N Elastomer and S… (1) - Unitized Ceramic Carbon (2)
- Solid Size
- Speed Rating
- Temperature Rating
- -33 to 170 Deg F (1)
- 100 Deg F (Continuous Duty), 140 Deg F (Intermittent ) (1)
- 104 Deg F (1)
- 130 DEG F (1)
- 130 Deg F (4)
- 140 DEG F (1)
- 140 Deg F (2)
- 140 Deg F (Liquid), 266 Deg F (Stator), 105 Deg F (Thermal… (1)
- 140 Deg F (Liquid), 266 Deg F (Stator), 221 Deg F (Thermal… (1)
- Maximum 140 Deg F (Liquid), Maximum 266 Deg F (Stator), 24… (1)
- Type
- Warranty + Show All Refinements
Clean-Outs, Sump Pumps & Accessories
Page Loading...
Can't find what you are looking for?
Please fill out our non-stock/special order form and we'll get right back to you. Thanks!