Refine Results

• Brand
  •  B&G (17)
• Product Type
  •  Air Vent (1)
  •  Balance Valve Assembly (1)
  •  Balancing Valve (2)
  •  Bearing Assembly (18)
  •  Bearing Frame Assembly (2)
  •  Bearing Frame Repair Kit (2)
  •  Body Gasket (1)
  •  Boiler Pump And Motor Assembly (1)
  •  Booster Pump (10)
  •  Booster Pump Coupler Assembly (1)
  •  Booster Pump Flange Gasket Set (2)
  •  Booster Pump Motor Mount Set (1)
  •  Booster Pump Motor Power Pack (2)
  •  Centrifugal Pump Bearing Assembly (1)
  •  Centrifugal Pump Fastener Package (1)
  •  Centrifugal Pump Motor (1)
  •  Centrifugal Pump Seal Kit (2)
  •  Circuit Setter Balance Valve (1)
  •  Circulating Booster Pump (7)
  •  Circulating Pump (5)
  •  Circulating Pump Flange (1)
  •  Circulating Pump Motor Power Pack (7)
  •  Circulator (9)
  •  Circulator And Centrifugal Pump Bearing Assembly (1)
  •  Circulator Companion Flange (6)
  •  Circulator Coupling (1)
  •  Circulator Flange Gasket Set (1)
  •  Circulator Pump (9)
  •  Circulator Pump Bearing Assembly (6)
  •  Circulator Pump Bearing Assembly And Impeller (1)
  •  Circulator Pump Body (1)
  •  Circulator Pump Coupler Assembly (1)
  •  Circulator Pump Flange (1)
  •  Circulator Pump Impeller (2)
  •  Circulator Pump Motor Mount Set (1)
  •  Circulator Pump Union Connection (1)
  •  Condensate Pump (3)
  •  Coupler And Ring Mount Set (1)
  •  Dual Unit Valve (1)
  •  Flange (1)
  •  Flange Gasket Set (1)
  •  Flow Control Valve (9)
  •  Half Union Connection (2)
  •  Hydronic Heating Enhanced Air Separator (1)
  •  Impeller (31)
  •  In-Line Centrifugal Pump (2)
  •  Oil Lubricated Circulator (3)
  •  Pressure Reducing Valve (9)
  •  Pump Aquastat (1)
  •  Pump Companion Flange (1)
  •  Pump Coupler Assembly (1)
  •  Pump Flange (1)
  •  Pump Motor (3)
  •  Pump Motor Power Pack (1)
  •  Pump Sleeve Coupler (1)
  •  Pump Timer Kit (1)
  •  Red Ring Copper Fitting (1)
  •  Rotor Circulator (4)
  •  Safety Relief Valve (1)
  •  Seal (1)
  •  Seal Kit (19)
  •  Shaft And Sleeve (2)
  •  Sleeve Bearing Assembly (3)
  •  Sleeve Kit (4)
  •  Tee Fitting (6)
  •  Thermostatic Switch (1)
  •  Volute (7)
  •  Wet Rotor Circulating Pump (5)
  •  Wet Rotor Circulator Pump (1)
• Additional Information
  •  Flange Size 3/4 Inch, 1 Inch Threaded (1)
  •  Lead-Free (7)
  •  Lead-Free; Length 4-7/16 Inch; End Connection Soldered; Te… (1)
• Applicable Standard
  •  ANSI/NSF 372, CSA (1)
  •  UL (Canada and US) (3)
  •  UL (Canada and US), CSA (3)
  •  UL (Canada and US), CSA, ANSI/NSF 372 (3)
  •  UL, CSA (1)
  •  UL, UL (Canada and US) (1)
• Application
  •  Hydronic Heating System (1)
  •  Hydronic Heating and Domestic Hot Water Circulation (2)
  •  Hydronic System, Radiant, Geothermal Heating and Cooling S… (3)
  •  Oil Lubricant (1)
  •  Potable Water System, Hydronic System (1)
  •  Residential, Light Commercial, Heating and Cooling System,… (1)
  •  Residential, Light Commercial, Potable Water System (1)
  •  Residential, Light Commercial, Potable Water/ NBF and SSF (1)
• Casing Material
  •  Bronze (8)
  •  Cast Iron (3)
• Discharge Head
  •  0 to 10 Foot (1)
  •  0 to 12 Foot (3)
  •  0 to 20 Foot (1)
  •  0 to 30 Foot (1)
  •  0 to 53 Foot (1)
  •  20 Feet (1)
• Discharge Size
  •  1 Inch or 1-1/4 Inch or 1-1/2 Inch (1)
  •  1 Inch, 1-1/4 Inch, 1-1/2 Inch (1)
  •  2 Inch (1)
  •  3 Inch (2)
  •  3/4 Inch or 1 Inch or 1-1/4 Inch or 1-1/2 Inch (2)
  •  3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch (3)
• End Connection
  •  Flanged x Flanged (9)
  •  Threaded Flanged x Threaded Flanged (1)
• Flow Rate
  •  0 to 130 GPM (1)
  •  0 to 32 GPM (1)
  •  0 to 37 GPM (2)
  •  0 to 40 GPM (1)
  •  0 to 50 GPM (1)
  •  0 to 75 GPM (1)
  •  115 GPM (1)
• Impeller Design
  •  Centrifugal (1)
  •  Closed (1)
  •  Closed Loop (1)
• Impeller Material
  •  Glass Filled Polyphenylene Sulfide (3)
  •  Nary (1)
  •  Noryl (3)
  •  Phenolic (2)
  •  Zinc Plated Steel/Brass (1)
• Inclusions Features
  •  Carbon Bearing, Maintenance-Free, Compact Design (1)
  •  Double Sintered Carbon (1)
  •  Double Sintered Carbon Bearing, Maintenance-Free (2)
  •  Hardened Integral Thrust Collar, (2) Horizontal Sleeve Bea… (1)
  •  Sealed Precision Permanently Lubricated Steel Ball Bearing… (2)
  •  Sealed Precision Permanently Lubricated Steel Ball Bearing… (1)
  •  Sleeve Bearing, Noise Dampening Coupler, Precision Ground … (2)
• Input Supply Rating
  •  115 Volt AC 60 Hertz 1-Phase (1)
  •  115 Volt AC 60 Hertz 1-Phase 1.1 Amp (1)
  •  115 Volt AC 60 Hertz 1-Phase 1.9 Amp (2)
  •  115 Volt AC 60 Hertz 1-Phase 2.1 Amp (1)
  •  115 Volt AC 60 Hertz 1-Phase 4.7 Amp (1)
  •  115 Volt AC 60 Hertz 1-Phase 4.8 Amp (1)
  •  115 Volt AC at 60 Hertz 1-Phase (1)
  •  115 Volt AC at 60 Hertz 1-Phase 1.1 Amp (1)
  •  115 Volt AC at 60 Hertz 1-Phase 2.3 Amp (1)
  •  115/230 Volt at 60 Hertz 1-Phase 4.2/2.1 Amp (1)
• Item
  •  Isolation Flange (1)
• Material
  •  Chrome Plated Steel (1)
• Model No. (Corrected)
  •  100-AB (1)
  •  2 (1)
  •  HV (1)
  •  LR (1)
  •  NBF (2)
  •  PL (2)
• Motor Type
  •  Built-In Impedance Protection (1)
  •  Drip-Proof, Sleeve-Bearing, Quiet Operating, Rubber Mounte… (1)
  •  Lubricated, Built-In Impedance Protected (1)
  •  Lubricated, Built-In Thermal Protection (1)
  •  Oil Lubricated, Built-In Overload Protection, Open Dripproof (1)
  •  Oil Lubricated, Open Dripproof (1)
  •  Permanently Oil Lubricated, Open Drip-Proof (1)
  •  Permanently Oil Lubricated, Open Dripproof (2)
  •  Wet Rotor Circulator (1)
• Overall Dimensions
  •  10-3/4 Inch Length x 5-1/8 Inch Width x 8-1/2 Inch Height (1)
  •  14-7/8 Inch Length x 6-3/8 Inch Height (1)
  •  15-3/8 Inch Length x 8-1/2 Inch Height (1)
  •  16-5/8 Inch Length x 8-1/2 Inch Height (1)
  •  17-1/2 Inch Length x 10 Inch Height (1)
  •  3-7/8 Inch Width x 6-3/8 Inch Height (1)
  •  6-3/16 Inch Length x 5-1/8 Inch Width x 6-3/8 Inch Height (1)
  •  6-3/8 Inch Length x 5-9/16 Inch Width x 4-7/8 Inch Height (1)
  •  6-7/8 Inch Length x 5-3/4 Inch Width x 6-3/8 Inch Height (1)
  •  9-1/8 Inch Length x 4-1/2 Inch Width x 8-1/2 Inch Height (1)
  •  9-9/16 Inch Length x 4-3/4 Inch Width x 6-3/8 Inch Height (1)
• Power Rating
  •  1/12 HP (1)
  •  1/3 HP (1)
  •  1/6 HP (3)
  •  125 Watt (2)
  •  2/5 HP (2)
  •  270 Watt (1)
  •  92 Watt (1)
• Pressure Rating
  •  125 PSI (4)
  •  150 PSI (6)
  •  150 PSIG (1)
• Shaft Material
  •  Ceramic (4)
  •  Heat Treated Carbon Steel (3)
  •  Stainless Steel (3)
• Shaft Seal Details
  •  Carbon on Ceramic Mechanical Seal (1)
  •  Carbon on Ceramic, Mechanical Seal (1)
  •  Carbon on Silicon Carbide Mechanical Seal (3)
  •  Mechanical, Carbon on Ceramic (1)
• Size
  •  3/4 Inch (1)
• Speed Rating
  •  1725 RPM (3)
  •  2940 RPM (1)
  •  2950 RPM (2)
  •  3200 RPM (1)
  •  3250 RPM (1)
  •  3300 RPM (2)
• Suction Size
  •  1 Inch or 1-1/4 Inch or 1-1/2 Inch (1)
  •  1 Inch, 1-1/4 Inch, 1-1/2 Inch (1)
  •  2 Inch (1)
  •  3 Inch (2)
  •  3/4 Inch or 1 Inch or 1-1/4 Inch or 1-1/2 Inch (2)
  •  3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch (3)
• Temperature Rating
  •  225 Deg F (4)
  •  225 Deg F (Standard Seal), 250 Deg F (Special Seal) (4)
  •  230 Deg F (1)
  •  40 to 225 Deg F (2)
• Type
  •  3-Piece (1)
  •  3-Piece, In-Line (2)
  •  3-Piece, In-Line, Oil Lubricated, Horizontal Mount (1)
  •  In-Line, 3-Speed, Wet Rotor (1)
  •  In-Line, Low Head (1)
  •  In-Line, Wet Rotor, Close Coupled (3)
  •  In-Line, Wet Rotor, Horizontal (1)
  •  Wet Rotor, In-Line (1)
• Used On Item
  •  Circulating Pump (1)
• Used On Model Brand
  •  20-35/36-45/55-45/PL-30/PL-36/PL-55/100/PR/LR/NRF/NBF/SSF … (1)
• Warranty
  •  3 Year (1)
  •  3 Year from Date of Manufacture/18 Month from Date of Inst… (1)
  •  3 Year from the Date of Manufacture/18 Month from Date of … (2)
+ Show All Refinements