Refine Results

• Brand
  •  B&G (14)
• Product Type
  •  Air Vent (1)
  •  Balance Valve Assembly (1)
  •  Balancing Valve (2)
  •  Bearing Assembly (18)
  •  Bearing Frame Assembly (2)
  •  Bearing Frame Repair Kit (2)
  •  Body Gasket (1)
  •  Boiler Pump And Motor Assembly (1)
  •  Booster Pump (10)
  •  Booster Pump Coupler Assembly (1)
  •  Booster Pump Flange Gasket Set (2)
  •  Booster Pump Motor Mount Set (1)
  •  Booster Pump Motor Power Pack (2)
  •  Centrifugal Pump Bearing Assembly (1)
  •  Centrifugal Pump Fastener Package (1)
  •  Centrifugal Pump Motor (1)
  •  Centrifugal Pump Seal Kit (2)
  •  Circuit Setter Balance Valve (1)
  •  Circulating Booster Pump (7)
  •  Circulating Pump (5)
  •  Circulating Pump Flange (1)
  •  Circulating Pump Motor Power Pack (7)
  •  Circulator (9)
  •  Circulator And Centrifugal Pump Bearing Assembly (1)
  •  Circulator Companion Flange (6)
  •  Circulator Coupling (1)
  •  Circulator Flange Gasket Set (1)
  •  Circulator Pump (9)
  •  Circulator Pump Bearing Assembly (6)
  •  Circulator Pump Bearing Assembly And Impeller (1)
  •  Circulator Pump Body (1)
  •  Circulator Pump Coupler Assembly (1)
  •  Circulator Pump Flange (1)
  •  Circulator Pump Impeller (2)
  •  Circulator Pump Motor Mount Set (1)
  •  Circulator Pump Union Connection (1)
  •  Condensate Pump (3)
  •  Coupler And Ring Mount Set (1)
  •  Dual Unit Valve (1)
  •  Flange (1)
  •  Flange Gasket Set (1)
  •  Flow Control Valve (9)
  •  Half Union Connection (2)
  •  Hydronic Heating Enhanced Air Separator (1)
  •  Impeller (31)
  •  In-Line Centrifugal Pump (2)
  •  Oil Lubricated Circulator (3)
  •  Pressure Reducing Valve (9)
  •  Pump Aquastat (1)
  •  Pump Companion Flange (1)
  •  Pump Coupler Assembly (1)
  •  Pump Flange (1)
  •  Pump Motor (3)
  •  Pump Motor Power Pack (1)
  •  Pump Sleeve Coupler (1)
  •  Pump Timer Kit (1)
  •  Red Ring Copper Fitting (1)
  •  Rotor Circulator (4)
  •  Safety Relief Valve (1)
  •  Seal (1)
  •  Seal Kit (19)
  •  Shaft And Sleeve (2)
  •  Sleeve Bearing Assembly (3)
  •  Sleeve Kit (4)
  •  Tee Fitting (6)
  •  Thermostatic Switch (1)
  •  Volute (7)
  •  Wet Rotor Circulating Pump (5)
  •  Wet Rotor Circulator Pump (1)
• Additional Information
  •  Lead-Free; Current Rating 1.9 Amp (1)
  •  Lead-Free; Includes Pre-Assembled Shaft, Sleeve and Bearin… (1)
  •  Lead-Free; Material 304 Stainless Steel (Ball), Glass and … (1)
  •  Lead-Free; Overall Dimension 2.33 Inch Width x 3.33 Inch H… (1)
• Applicable Standard
  •  CSA, ANSI/NSF 61G/372, AB1953, Vermont S152 (1)
  •  CSA, NSF//ANSI 61G/372 (1)
  •  UL (Canada and US) (5)
  •  UL (Canada and US), CSA (1)
  •  UL, CSA (1)
• Application
  •  HVAC and Potable Water System, Plumbing (1)
  •  Hydronic System (1)
  •  Hydronic System, Radiant, Geothermal Heating and Cooling S… (6)
  •  Potable Water System, HVAC System, Plumbing (1)
• Body Material
  •  ASTM B283 C69300 Brass (2)
• Casing Material
  •  Bronze (1)
  •  Cast Iron (6)
• Collection
  •  Circuit Setter[R] Plus (2)
  •  XL-11[TM] (1)
• Discharge Head
  •  0 to 12 Foot (1)
  •  0 to 15 Foot (1)
  •  0 to 17.5 Foot (1)
  •  0 to 20 Foot (1)
  •  0 to 25 Foot (1)
  •  0 to 30 Foot (1)
  •  0 to 54 Foot (1)
• Discharge Size
  •  1 Inch or 1-1/4 Inch or 1-1/2 Inch (1)
  •  1 Inch, 1-1/4 Inch, 1-1/2 Inch (2)
  •  2 Inch (2)
  •  3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch (2)
• Drain Tapping Details
  •  1/4 Inch Threaded (1)
  •  1/4 Inch Threaded Tapped and Plugged Drain (1)
• End Connection
  •  Flanged x Flanged (7)
  •  Soldered x Soldered (1)
  •  Threaded (1)
• End To End Distance
  •  4.29 Inch (1)
  •  6.5 Inch (1)
• Flow Rate
  •  0 to 130 GPM (1)
  •  0 to 30 GPM (1)
  •  0 to 40 GPM (1)
  •  0 to 50 GPM (2)
  •  0 to 60 GPM (1)
  •  0 to 70 GPM (1)
• Impeller Design
  •  Centrifugal (1)
  •  Closed (1)
• Impeller Material
  •  Glass Filled Noryl (5)
  •  Glass Filled Polyphenylene Sulfide (1)
• Inclusions Features
  •  304 Stainless Steel Ball, Glass and Carbon Filled TFE Seat… (1)
  •  Long Bronze Sleeve Bearing, Noise Dampening Coupler, Preci… (1)
  •  Precision-Machined Ball, Calibrated Nameplate, Memory Stop… (1)
  •  Sealed Precision Permanently Lubricated Steel Ball Bearing… (5)
  •  Sealed Precision Permanently Lubricated Steel Ball Bearing… (1)
• Input Supply Rating
  •  115 Volt AC 60 Hertz 1-Phase (1)
  •  115 Volt AC 60 Hertz 1-Phase 1.4 Amp (1)
  •  115 Volt AC 60 Hertz 1-Phase 1.8 Amp (1)
  •  115 Volt AC 60 Hertz 1-Phase 2.1 Amp (2)
  •  115 Volt AC 60 Hertz 1-Phase 4.7 Amp (1)
  •  115 Volt AC 60 Hertz 1-Phase 4.8 Amp (1)
• Item
  •  Bearing Frame Repair Kit (1)
• Media Handled
  •  Water (2)
• Meter Port Details
  •  Purge, Pressure/Temperature Port (1)
• Model No. (Corrected)
  •  HV (1)
  •  PL (6)
• Motor Type
  •  Oil Lubricated (1)
  •  Permanently Lubricated Open Dripproof Motor (1)
  •  Permanently Oil Lubricated, Open Drip Proof (3)
  •  Permanently Oil Lubricated, Open Dripproof (2)
• Nominal Size
  •  1 Inch (1)
  •  3 Inch (1)
• Overall Dimensions
  •  10-3/4 Inch Length x 5-1/8 Inch Width x 8-1/2 Inch Height (1)
  •  15-1/4 Inch (1)
  •  8-5/8 Inch Length x 4-3/8 Inch Width x 6-3/8 Inch Height (1)
  •  9-1/8 Inch Length x 4-1/2 Inch Width x 8-1/2 Inch Height (2)
  •  9-15/16 Inch Length x 4-5/8 Inch Width x 8-1/2 Inch Height (1)
  •  9-9/16 Inch Length x 4-3/4 Inch Width x 6-3/8 Inch Height (1)
• Power Rating
  •  1/12 HP (1)
  •  1/6 HP (4)
  •  2/5 HP (2)
• Pressure Rating
  •  125 PSI (1)
  •  150 PSI (6)
  •  300 PSI at 200 Deg F, 250 PSI at 225 Deg F, 200 PSI at 250… (1)
  •  400 PSIG (1)
• Shaft Material
  •  Carbon Steel (1)
  •  Carbon Steel with Stainless Steel Sleeve (5)
  •  Stainless Steel (1)
• Shaft Seal Details
  •  Carbon on Silicon Carbide Mechanical Seal (5)
  •  Carbon on Silicon Carbide, Mechanical Seal (1)
  •  Mechanical Seal (1)
• Speed Rating
  •  1725 RPM (1)
  •  2650 RPM (1)
  •  3200 RPM (1)
  •  3250 RPM (1)
  •  3300 RPM (2)
  •  3400 RPM (1)
• Suction Size
  •  1 Inch or 1-1/4 Inch or 1-1/2 Inch (1)
  •  1 Inch, 1-1/4 Inch, 1-1/2 Inch (2)
  •  2 Inch (2)
  •  3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch (2)
• Temperature Rating
  •  -4 to 250 Deg F (2)
  •  225 Deg F (6)
  •  225 Deg F (Standard Seal), 250 Deg F (Special Seal) (1)
• Type
  •  3-Piece (1)
  •  Calibrated (1)
  •  In-Line, Wet Rotor, Close Coupled (2)
  •  In-Line, Wet Rotor, Close Coupled, Horizontal (3)
  •  In-Line, Wet Rotor, Horizontal (1)
  •  Large (1)
  •  Straight (1)
• Used On Item
  •  Centrifugal Pump (1)
• Used On Model Brand
  •  BF/AB (1)
+ Show All Refinements