Accessories
Bathtubs & Shower Bases
Faucets
Furniture & Accessories
Lighting
Shower Doors
Shower Trims
Sinks
Toilets & Urinals
Appliances
Bar Faucets
Bar Sinks
Beverage Faucets
Pot Fillers
Boilers
Components
Furnaces
Heat Pumps
Hydronic Heating
Residential Heating
Thermostats & Controls
Water Heaters
Air Conditioners
Air Quality
Coils & Linesets
Commercial HVAC
Ductless Systems
Parts & Accessories
Bathroom
Chemicals & Compounds
Clean-Outs & Accessories
Commercial Plumbing
Kitchen
Laundry/Utility Room
Replacement Parts
Roughs & Accessories
Plumbing Specialties
Brand: Saniflo
SKU: 89
The Sanicubic 1 is a pre-assembled heavy-duty simplex grinder pump that meets the demanding needs of commercial and residential sewage applications. The Sanicubic 1 is powerful enough for all your upflush toilet needs, and great option for a basement toilet. The grinder system made of stainless steel liquefies solids into small particles prior to being passed through the 1-1/2" discharge. It is designed to handle multiple waste fixtures for applications such as residential single or group homes, commercial buildings, schools and many more. The Sanicubic 1 operation is as simple as the installation. The effluent enters the pump through one of four different inlets one on either side of the unit at the bottom and two along the top. The inlets can accommodate 1-1/2" or 4" diameter pipes. As soon as the wastewater level reaches the trigger point, the pumping system activates. The effluent is then pumped out through 1-1/2" diameter rigid pipe connected on the top of the pump. Maximum pumping distances are 36 Ft vertically and/or 328 Ft horizontally. The inside of the Sanicubic 1 comprises of a couple of pressure switches and a circuit board assembly, which starts and stops the unit, a powerful motor, which drive the stainless steel cutting blade and the pump. The motor is sealed for life in an oil filled enclosure. A common spindle/shaft drives the impeller and the macerator blade. The moving parts therefore are kept to an absolute minimum. Water and organic waste matter that enter the enclosure are reduced to slurry and are picked up by the impeller mounted beneath the motor. The pump is able to handle up to 50 GPM. If the incoming rate is higher than the discharge rate, the pump automatically signals the alarm" stage. This will activate the visual alarm mounted on the pumps control panel and the audible alarm from the wired control box (if connected). The wastewater from other sanitary fixtures is discharged into the Sanicubic 1 via four 11-1/2" or 4" inlets, on either side of the housing and on the top of the enclosure. The internal discharge pipe comes equipped with a check valve that prevents back flow into the unit. Isolating valves (ball, gate valves) must be installed on waste inlets and on the discharge pipe to ensure that any service/maintenance may be carried out safely.
Saniflo 014 Sanigrind Grinder Pump For Bottom Outlet Toilets
Saniflo 082 Saniaccess 3 Macerator 1/2" HP Pump
Saniflo Sanicubic 2 Simplex Grinder System (220-240Volt/60hz)...